Enerlites HET01-W-2PCS 7-Day Digital Timer Switch, 15A 1800W 120V, White 2 Pack
Two-pack of in-wall digital timer switches with blue backlight, 18 programmable on/off schedules, battery backup and screwless wall plates for lights, fans, motors and sprinklers at 15 A / 1800 W.
- TypeWall Mount, With Backlight
- Voltage12
- Amps15
- Compatibility/Fitmentlights, fans, motors, sprinklers
- Pole ConfigurationSPDT
- Horsepower1800 watts
- Program indoor and outdoor lights automatically with 18 programmable ON/OFF schedules
- Blue backlit display improves visibility in low-light areas for easy programming
- Ni-MH battery backup retains programmed settings during power interruptions
- Screwless decorator wall plate included for a clean modern appearance
- UL Listed 15A 1800W 120VAC rating for safe control of lights fans motors and sprinklers
Product Identity
The Enerlites HET01-W-2PCS is a 7-day digital timer switch sold as a white two-pack. Each unit mounts in a standard wall box and controls lights, fans, motors or sprinklers up to 15A and 1800W on a 120VAC circuit. The blue backlit display and push-button interface allow local programming without a smart hub.
Installation Requirements
A neutral wire is mandatory in the switch box for the timer electronics to operate. The device is single-pole only and will not function in three-way or multi-location switching arrangements. A built-in Ni-MH battery preserves schedules during power interruptions and a screwless decorator wall plate is included for a clean finish.
Suitable Buyers
Homeowners seeking scheduled automation for indoor or outdoor lighting, ceiling fans, irrigation or small motors without relying on Wi-Fi will find this a direct fit. Installers without a neutral conductor in the wall box, or projects that require three-way control, should select a different switching solution.
Highlights
- Program indoor and outdoor lights automatically with 18 programmable ON/OFF schedules
- Blue backlit display improves visibility in low-light areas for easy programming
- Ni-MH battery backup retains programmed settings during power interruptions
- Screwless decorator wall plate included for a clean modern appearance
- UL Listed 15A 1800W 120VAC rating for safe control of lights fans motors and sprinklers
Specifications
| Type | Wall Mount, With Backlight |
|---|---|
| Voltage | 12 |
| Amps | 15 |
| Compatibility/Fitment | lights, fans, motors, sprinklers |
| Pole Configuration | SPDT |
| Horsepower | 1800 watts |
| Watts | 1800 watts |
| Number of Receptacles | With Backlight, HET01-W-2PCS |
| Receptacle Type | 15 amps, 120 volts_of_alternating_current |
| Size/Dimensions | 1.47 in x 1.71 in x 2.7 in |
| Color/Finish | White |
| Style | Wall Mount |
| Switch Type | Push Button |
| Number of Poles | 1-way |
| Contact Form | 1-way |
| Enclosure Type | IP00, Wall Mount |
| Input Voltage | 120 volts_of_alternating_current |
| Mounting | Wall Mount |
| Operating Temperature Range | 0 degrees_fahrenheit |
| Features | lights, fans, motors, sprinklers |
| Brand | ENERLITES |
| Model | HET01-W-2PCS |
| Item Count | 12 pack |
| Selling Unit | With Backlight |
| Commercial/Residential | lights, fans, motors, sprinklers |
| Part Number | HET01-W-2PCS |
Questions about this item
What is the maximum load this timer can handle before it trips?
The timer is rated for 15 A and 1800 W at 120 VAC, with a tungsten limit of 1200 W and a motor limit of 1/2 HP.
How much heat or noise does the unit produce when it runs continuously?
The switch itself is solid-state with no moving parts, so it generates minimal heat and no audible noise during all-day operation.
Which wiring must already be present in the wall box for this timer to work?
A neutral wire is required in the box; the timer is single-pole only and will not function in a 3-way circuit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



