We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black PCIe riser cards with red USB 3.0 cables and dual 6-pin power connectors

EN-Labs

EN-Labs PCIe 1X to 16X Riser Cable 60cm 3.0 TWO 6Pin 3-Pack

SKU CH-2PTQ-6EVDF

A three-pack of PCIe x1-to-x16 riser cables with 60 cm USB 3.0 links, four solid capacitors and dual 6-pin plus Molex power inputs for GPU mining rigs

  • ColorBlack
  • FeaturesThe perfect solution for setting up Ethereum mining rigs, wh

Style 3-Pack

  • Stable power delivery with four solid capacitors
  • Overcurrent protection via surface-mounted fuse
  • Flexible 60 cm USB 3.0 cable for easier GPU placement
  • Three riser cards included for multi-GPU mining rigs
  • Molex 4-pin, SATA and two 6-pin power options on each card

PCIe 1X to 16X Riser Kit

This three-pack provides PCIe 1X to 16X riser cards with 60cm USB 3.0 cables for graphics-card extension. Each board includes four solid capacitors, voltage regulation components and an onboard fuse for stable power delivery. The kit suits builders assembling GPU mining rigs or spacing cards in open-air frames. No drivers are required for installation.

Mining Rigs and Multi-GPU Builds

The risers fit x1, x4, x8 and x16 slots and integrate two 6-pin plus Molex and SATA power interfaces on the PCB to reduce motherboard load. Buyers who need longer cables or a single riser instead of a three-pack should look elsewhere. Systems without spare 6-pin or Molex connectors cannot use these boards safely.

60cm USB 3.0 Extension Length

The supplied USB 3.0 cable measures 60cm and determines how far the graphics card can sit from the motherboard. Only one power input — either 6-pin, Molex or SATA — should be connected per riser at any time.

Highlights

  • Stable power delivery with four solid capacitors
  • Overcurrent protection via surface-mounted fuse
  • Flexible 60 cm USB 3.0 cable for easier GPU placement
  • Three riser cards included for multi-GPU mining rigs
  • Molex 4-pin, SATA and two 6-pin power options on each card

Specifications

BrandEN-Labs
ColorBlack
FeaturesThe perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners. 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Integrate Molex 4pin, SATA and 6-pin PCI-E power interface on PC

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I use the Molex 4-pin, SATA or the two 6-pin PCIe connectors on each riser?

Only one power input is needed per riser; do not plug two or three simultaneously.

What does the PCIe 3.0 x16 link actually deliver when the card sits in an x1 slot?

The riser passes a PCIe 3.0 x1 electrical connection; the x16 slot is mechanical only, so bandwidth is limited to x1 speeds.

How does the 60 cm USB 3.0 cable affect signal quality compared with a shorter ribbon?

The 60 cm USB 3.0 cable carries the differential pairs for PCIe 3.0 x1; solid capacitors and voltage regulation on the board help maintain signal integrity at this length.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.