We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black PCIe riser cards with red USB 3.0 cables and multiple power connectors

EN-Labs

EN-Labs PCIe 1X to 16X Riser Cable 60cm 3.0 6 Pack

SKU CH-5VFK-KVXMG

Six riser cables extend a PCIe x1 slot to x16 with a 60 cm USB 3.0 link, four solid capacitors, dual 6-pin and Molex power inputs, and SATA power integration

  • ColorBlack
  • FeaturesThe perfect solution for setting up Ethereum mining rigs, wh

Style 6-Pack

  • 60 cm USB 3.0 cable gives flexible GPU placement
  • Four solid capacitors ensure stable power delivery
  • Dual 6-pin plus Molex power inputs reduce motherboard load
  • Supports x1, x4, x8 and x16 PCIe slots
  • Six riser cards included for multi-GPU rigs

PCIe 1X to 16X riser for mining rigs

This six-pack provides PCIe 1X to 16X riser cards designed for building Ethereum mining rigs, from small open-air frames to larger rack-based setups. Each card includes four solid capacitors and multiple voltage regulation components for stable power delivery. An integrated surface-mounted fuse adds overcurrent protection to safeguard connected hardware. The boards fit x1, x4, x8 and x16 PCIe slots and require no driver installation.

Sustained load with USB 3.0 link

A 60 cm USB 3.0 cable links the 1X and 16X ends, allowing flexible GPU placement while maintaining faster data transfer under continuous mining workloads. The riser draws auxiliary power directly from the PSU via integrated Molex 4-pin and two 6-pin PCIe connectors, reducing the power burden on the motherboard. Only one power input should be used at a time to avoid overload. Four mounting holes on the 16X side secure the graphics card for stable long-term operation.

Power interface constraints

The PCB integrates Molex 4-pin, SATA and two 6-pin PCIe power interfaces, but the design permits only a single active connection; plugging in two or three simultaneously is not supported. The USB 3.0 cable carries the signalling between the 1X host slot and the 16X device endpoint, so bandwidth is limited to the 1X electrical width despite the physical 16X connector. Builders needing multiple GPUs per 16X slot or full 16-lane throughput cannot use this adapter for those purposes.

Highlights

  • 60 cm USB 3.0 cable gives flexible GPU placement
  • Four solid capacitors ensure stable power delivery
  • Dual 6-pin plus Molex power inputs reduce motherboard load
  • Supports x1, x4, x8 and x16 PCIe slots
  • Six riser cards included for multi-GPU rigs

Specifications

BrandEN-Labs
ColorBlack
FeaturesThe perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners. 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Integrate Molex 4pin, SATA and 6-pin PCI-E power interface on PC

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 60 cm USB 3.0 riser cable draw when a GPU runs all day?

The riser uses four solid capacitors and onboard voltage regulation to deliver stable power without adding load to the motherboard slot.

Which power connectors must my PSU provide for each riser?

Each board includes one Molex 4-pin and two 6-pin PCI-E sockets; connect only one of them to your power supply.

Will this riser work with an older motherboard that only has PCIe x1 slots?

Yes, the x1-to-x16 adapter fits x1, x4, x8 and x16 slots and needs no driver installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.