We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved Molex to three 4-pin fan splitter cable, 10 inches long

EN-Labs

EN-Labs MOLEXTX4-1X310IN 10 inch Molex to 3x 4-pin fan splitter cable

SKU CH-CN15-SFVWF

Splits one Molex connector into three 3-pin or 4-pin fan headers over a 10-inch sleeved cable

  • TypeCable Splitters
  • ColorBlack
  • Length6" - 10"
  • Cable Length10 in.
  • Connector AMolex
  • Connector BTX4

Style PWM 1x3

Cable Length 10' Braided

  • Powers up to four fans from a single Molex connector
  • 10-inch length fits compact builds without excess cable
  • Black sleeved jacket protects wires and keeps routing tidy
  • Standard 22 AWG copper cores deliver reliable 12 V power
  • Only two pins per fan header are energised so PWM control is not possible

EN-Labs Molex 4-to-3 Fan Splitter Cable

This 10 inch adapter converts a single PSU Molex LP4 connector into three female fan headers so multiple case coolers can run from one power lead. It suits builders who need to add fans when motherboard headers are full or missing. The black sleeved jacket keeps wiring tidy inside the chassis.

Molex power limits fan control features

Power comes directly from the 12 V Molex rail so only two pins on each fan header are energised. The cable cannot throttle fan speed or provide PWM control regardless of the fan model attached. Fans will run at full voltage continuously while the system is on.

Three female headers on one 10 inch lead

The splitter terminates in three TX3 / TX4 female connectors spaced along a 10 inch UL 1007 22 AWG copper cable. Buyers who need PWM speed regulation or more than three fans per Molex connector should choose a different solution.

Highlights

  • Powers up to four fans from a single Molex connector
  • 10-inch length fits compact builds without excess cable
  • Black sleeved jacket protects wires and keeps routing tidy
  • Standard 22 AWG copper cores deliver reliable 12 V power
  • Only two pins per fan header are energised so PWM control is not possible

Specifications

BrandEN-Labs
ModelMOLEXTX4-1X310IN
TypeCable Splitters
ColorBlack
Length6" - 10"
Cable Length10 in.
Connector AMolex
Connector BTX4
Connector Number4

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 10-inch length or a different size for my case?

This cable is supplied only in a 10-inch length, so choose it when the Molex connector can reach the fan headers within that distance.

What does the 12 V Molex rating mean once the cable is installed?

The 12 V Molex plug draws power directly from the PSU, delivering full voltage to every attached fan without motherboard speed control.

How does the TX4 connector limit PWM control in practice?

Only two pins on each TX4 connector are energised, so the PWM signal wire is absent and fans run at constant 12 V speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.