We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with one Molex plug splitting to five TX4 fan connectors

EN-Labs

EN-Labs MOLEXTX4-1X510IN 10 in Molex to 5 TX4 fan splitter

SKU CH-GCD3-B08ZV

Splits one Molex connector into five TX4 fan headers with a 10-inch sleeved cable

  • TypeCable Splitters
  • ColorBlack
  • Length6" - 10"
  • Cable Length10 in.
  • Connector AMolex LP4
  • Connector BTX4

Style PWM 1x5

Cable Length 10' Braided

  • Powers five fans from one Molex connector
  • 10-inch length fits compact chassis layouts
  • Black sleeved jacket protects wires and looks clean
  • 22 AWG copper cores deliver reliable 12 V supply
  • Two energised pins per header run fans at full speed

One Molex to five TX4 fan connectors

This adapter cable converts a single 12 V Molex LP4 lead from the power supply into five TX4 fan headers. It is intended for builders who need to run multiple case or cooler fans from one Molex output.

Simple plug-in with a fixed-speed limitation

Each female TX4 connector accepts a standard 3-pin or 4-pin PWM fan, but only two pins carry power so the fans run at full 12 V constantly. PWM speed control and motherboard monitoring are not supported.

10 inch black-sleeved 22 AWG copper cable

The 10 inch length suits compact routing inside most chassis and the black sleeved jacket keeps the loom tidy. The UL 1007 22 AWG copper conductors deliver reliable current to all five attached fans.

Highlights

  • Powers five fans from one Molex connector
  • 10-inch length fits compact chassis layouts
  • Black sleeved jacket protects wires and looks clean
  • 22 AWG copper cores deliver reliable 12 V supply
  • Two energised pins per header run fans at full speed

Specifications

BrandEN-Labs
ModelMOLEXTX4-1X510IN
TypeCable Splitters
ColorBlack
Length6" - 10"
Cable Length10 in.
Connector AMolex LP4
Connector BTX4
Connector Number6

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I confirm the fans are running at full speed after connecting them?

The adapter energises only two pins on each TX4 connector, so fans run at 12 V without PWM control; check that all five fans spin at maximum RPM once the system powers on.

What connectors and cables are included, and what must I supply?

The package provides a 10-inch black-sleeved cable with one Molex LP4 male plug and five TX4 female sockets; you must supply a PSU Molex output and up to five 3-pin or 4-pin fans.

Which variant should I choose if I need five fan headers on a single 10-inch lead?

The MOLEXTX4-1X510IN model delivers exactly five TX4 connectors on a 10-inch UL 1007 22 AWG cable, matching that requirement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.