We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved cable with one Molex plug splitting to four fan connectors

EN-Labs

EN-Labs Molex to 4x TX3/TX4 Fan Splitter Cable 10in Black

SKU CH-MXEE-EZQ1G

A 10-inch black sleeved cable splits one Molex connector into four 3-pin or 4-pin fan headers, powering up to four fans from a PSU Molex port with no PWM speed control

  • TypeCable Splitters
  • ColorBlack
  • Length6" - 10"
  • Cable Length10 in.
  • Connector AMolex
  • Connector BTX4

Style PWM 1x4

Cable Length 10' Braided

  • Connects four case fans from one Molex rail
  • 10-inch length fits tight routing paths
  • Black sleeved jacket protects wires and looks clean
  • 22 AWG copper cores carry 12 V reliably
  • Only two pins powered so speed control is not possible

Power connection for up to four case fans

This EN-Labs splitter cable draws 12 V power from a single Molex LP4 connector on the power supply and distributes it to four 3-pin or 4-pin fan headers. The ten-inch length suits compact routing inside a standard tower chassis.

Black sleeved jacket and 22 AWG copper wires

The sleeved jacket keeps the bundle tidy and protects the 100 % copper conductors built to UL 1007 specification. Only two pins on each fan connector carry current, so the cable delivers constant voltage without PWM signalling.

No PWM speed control on any connected fan

Because only the power and ground pins are energised, every attached fan runs at full 12 V speed regardless of motherboard headers or software settings. Builders who need variable fan curves should use a motherboard header or a dedicated PWM controller instead.

Highlights

  • Connects four case fans from one Molex rail
  • 10-inch length fits tight routing paths
  • Black sleeved jacket protects wires and looks clean
  • 22 AWG copper cores carry 12 V reliably
  • Only two pins powered so speed control is not possible

Specifications

BrandEN-Labs
ModelMOLEXTX4-1X410IN
TypeCable Splitters
ColorBlack
Length6" - 10"
Cable Length10 in.
Connector AMolex
Connector BTX4
Connector Number5

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the cable need any periodic replacement or servicing?

The cable is a passive copper assembly with a black sleeved jacket; it has no moving parts and requires no scheduled maintenance or replacement interval.

What limits how many fans I can run continuously from the single Molex connector?

Only two pins on each fan header are energised, so the Molex feed supplies 12 V to all four fans at full speed with no PWM control; the practical limit is the current rating of the PSU Molex rail.

How much heat or noise does the splitter add when all four fans run all day?

The 22 AWG copper wires and sleeved jacket add negligible resistance, so the cable itself produces no audible noise and no measurable heat beyond what the fans already draw.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.