We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved SATA to three TX4 fan splitter cable, ten inches long

EN-Labs

EN-Labs SATATX4-1X310IN SATA to 3×TX4 fan splitter cable 10 in black

SKU CH-83A9-FX12W

A 10 inch black sleeved cable splits one SATA power connector into three TX4 fan headers, energising only two pins per header so PWM control is not available

  • TypeCable Splitters
  • ColorBlack
  • Length6" - 10"
  • Cable Length10 in.
  • Connector ASATA
  • Connector BTX4

Style PWM 1x3

Cable Length 10 in.

  • Connects three case fans from one SATA power lead
  • 10 inch black-sleeved cable keeps routing tidy inside the case
  • 12 V delivery via 15-pin SATA connector powers fans directly from the PSU
  • Two active pins per header run fans at full speed without PWM control
  • 22 AWG 100 % copper conductors ensure reliable current flow

Connection & Control Limits

This splitter draws 12 V power from a SATA connector and feeds three TX4 fan headers. Only two pins on each header are energised so the cable cannot transmit PWM signals or regulate fan speed. All attached fans will run at full voltage continuously.

Sleeve & Gauge Details

The 10 in cable uses UL 1007 22 AWG copper conductors wrapped in a black sleeved jacket. A 15 pin SATA male plug connects to the power supply while three female TX4 connectors accept the fans.

PWM Absence Decides Fit

Because PWM control is absent this cable suits builds that need simple always-on cooling such as chassis intake or exhaust fans. Builders who require motherboard fan curves or speed reporting should choose a different splitter.

Highlights

  • Connects three case fans from one SATA power lead
  • 10 inch black-sleeved cable keeps routing tidy inside the case
  • 12 V delivery via 15-pin SATA connector powers fans directly from the PSU
  • Two active pins per header run fans at full speed without PWM control
  • 22 AWG 100 % copper conductors ensure reliable current flow

Specifications

BrandEN-Labs
ModelSATATX4-1X310IN
TypeCable Splitters
ColorBlack
Length6" - 10"
Cable Length10 in.
Connector ASATA
Connector BTX4
Connector Number4

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the SATA connector or 22AWG wiring need replacement after long-term use?

The 22AWG copper-core cable and 15-pin SATA connector are rated for continuous 12V delivery; no scheduled replacement is required under normal operation.

What stops me from adding more than three fans to the splitter?

Only three 4-pin fan headers are provided, and only two pins per header carry power, so a fourth fan cannot be connected.

Does the cable or SATA plug get hot when three fans run all day?

The 22AWG copper conductors handle the combined 12V load of three fans with minimal temperature rise, and the black sleeved jacket adds no measurable heat retention.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.