EN-Labs 5PKSATAIII25CMBL 5-pack SATA cable UV Blue 10 inch locking latch
- SATA Data Cable
- UV Blue
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Five 6-inch SATA III cables with straight-to-90° locking connectors for internal drives
Style 1 Angle
This five-pack supplies five SATA III data cables, each 6 inches long with a straight connector on one end and a 90-degree connector on the other. They link motherboards or host controllers to internal Serial ATA hard drives and DVD drives. The black cables include locking latches on both ends for a secure fit. Buyers who need longer runs or right-angle bends on both ends cannot use these.
The cables conform to the SATA 3.0 specification and support signalling up to 6 Gbps, while remaining backwards compatible with SATA I and SATA II devices. Actual throughput is limited by the rating of the attached drive and controller, so older hardware will not reach the peak rate. These cables carry data only and do not supply power to the connected drive.
Each cable plugs straight into a standard SATA port; the 90-degree end helps route the short 6-inch length in tight drive bays. The locking latch clicks into place and resists accidental disconnection during case moves. The short length can make routing difficult in full-tower chassis or when the drive bay sits far from the motherboard header.
| Brand | EN-Lab |
|---|---|
| Model | 5PKSATAIII15CMBK90 |
| Type | SATA Data Cable |
| Color | Black |
| Length | 6" |
| Cable Length | 6 in. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 6 inch / 15CM Color: Black UL listed RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 5 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The 5-pack gives you five identical 6-inch SATA 3.0 cables with locking latches, handy for RAID arrays or keeping spares in different systems.
It supports the SATA 3.0 maximum of 6 Gbps, but actual throughput depends on the drive and controller you connect.
The cables meet SATA 3.0 (6 Gbps) and are backward compatible with SATA I and II devices.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?