EN-Labs 5PKSATAIII15CMBK90 5-pack SATA 3.0 cable 6" straight to 90° black locking latch
- SATA Data Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Five SATA 3.0 cables with straight-to-90-degree locking connectors, 24 inches long, rated for 6 Gbps data transfer
Style 1 Angle
This five-pack supplies SATA III data cables rated for 6 Gbps transfer speeds. Each 24-inch cable uses a straight connector on one end and a 90-degree connector on the other, with locking latches at both ends. Copper conductors and shielding support reliable links between motherboards or host controllers and internal hard drives or DVD drives.
The 180-to-90-degree layout suits cases where a straight plug would press against a drive cage or side panel. Buyers who want right-angle plugs on both ends, or who need longer runs for full-tower layouts, should look at something else. The cables carry data only, so a separate power connection is still required for every drive.
Push each connector until the latch clicks; no tools are needed. The latch prevents accidental unplugging during drive swaps or case moves. Routing the 24-inch length around tight bends can stress the angled end if the cable is pulled tight, so leave a little slack at the drive side.
| Brand | EN-Lab |
|---|---|
| Model | 5PKSATAIII60CMBK90 |
| Type | SATA Data Cable |
| Color | Black |
| Length | 24" |
| Cable Length | 2 ft. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 24 inch / 60CM Color: Black UL listed RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 5 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
A standard SATA data port on the motherboard or host controller is required for each cable.
Yes, the SATA 3.0 interface is backward compatible with SATA I and SATA II devices.
Check the negotiated link speed in the BIOS or operating-system storage utility; it should report 6 Gbps when the drive and controller both support SATA 3.0.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?