EN-Labs 5PKSATAIII25CMBL90 5-pack SATA cable UV Blue 10 inch 90-degree locking latch
- SATA Data Cable
- UV Blue
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Five SATA III cables with straight-to-90° locking connectors, 10-inch length, rated for 6 Gbps data transfer
Style 1 Angle
This five-pack supplies straight-to-90-degree SATA III data cables for connecting motherboards or host controllers to internal hard drives and DVD drives. Each cable is 10 inches long and coloured black. The locking latch on every connector secures the link against accidental disconnection. The bundle suits builders adding multiple drives or configuring RAID arrays.
The 90-degree end reduces strain in tight drive bays and improves cable routing behind motherboard trays. A locking mechanism on both ends holds the connector firmly in place during vibration or transport. Shielded copper conductors maintain signal integrity up to the 6 Gbps specification. The cables are UL listed and RoHS compliant.
Push each connector straight into the SATA port until the latch clicks; no tools are required. The short 10-inch length limits routing flexibility in full-tower chassis. The pack contains only data cables, so a separate power connection is still needed for every drive. Buyers needing longer runs or right-angle connectors on both ends should look elsewhere.
| Brand | EN-Lab |
|---|---|
| Model | 5PKSATAIII25CMBK90 |
| Type | SATA Data Cable |
| Color | Black |
| Length | 10" |
| Cable Length | 10 in. |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Speed | 6Gb/s |
| Specifications | Type: SATA III Data Cable w/ Locking Latch Length: 10 inch / 25CM Color: Black UL listed RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | EnLabs SATA 3 cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately. The latest SATA Revision 3.0 allows for data transfer speeds of up to 6 Gbps, 2x faster than SATA II, backwards compatible with SATA I and SATA II. (Data transfer speed is limited by rating of the attached equipment.) 5 Pack SATA 3 cable is a cost effective way to provide replacement or spare |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The latches are moulded into each connector and rated for repeated mating cycles; they do not have a separate replacement schedule.
The 10 inch length keeps signal loss well within the SATA 3.0 specification, so the attached drive or controller will limit speed first.
They carry only data — no power conductors — so they generate negligible heat and add no measurable load to the system.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?