ELEGRP SPN10 electrical timer switch 120 V 3.75 A IP44
Wi-Fi timer switch controls lights via app or voice, fits single-pole wiring with neutral, IP44 rated
- TypeWall Mount, Crimp
- Voltage12
- Amps3.75 amps
- Compatibility/FitmentAmazon Alexa, Google Assistant
- Timing RangeFull Control
- Pole ConfigurationScrew
- Voice control via Alexa and Google Assistant
- App remote control from smartphone anywhere
- Automatic scheduling with sunrise sunset sync
- UL60730 certified for electrical safety
- IP44 rated wall mount enclosure
Single-pole smart light switch
The ELEGRP SPN10 is a single-pole Wi-Fi smart light switch designed for residential lighting circuits. It requires a neutral wire and connects to a 2.4 GHz network for app and voice control via Amazon Alexa or Google Assistant. The switch is UL certified under standard 60730 and carries an IP44 enclosure rating. It fits a standard wall box with dimensions of 131 mm by 85 mm by 60 mm.
Sustained operation within rated limits
The device is rated for 120 volts input and a maximum load of 3.75 amps, suitable for typical lighting circuits. Its operating temperature range spans 32 to 104 degrees Fahrenheit, ensuring stable performance during continuous daily use. The push-button rocker provides exceptionally quiet manual operation without mechanical clicking sounds. Memory function retains schedules and settings through power interruptions.
2.4 GHz Wi-Fi and single-pole wiring constraint
Control and scheduling depend on a 2.4 GHz Wi-Fi connection; 5 GHz networks are not supported. The single-pole design means it controls one circuit from a single location and cannot be used in three-way or multi-location switching setups. A neutral wire must be present in the wall box for installation. The IP44 rating protects against splashing water, making it suitable for damp indoor locations.
Highlights
- Voice control via Alexa and Google Assistant
- App remote control from smartphone anywhere
- Automatic scheduling with sunrise sunset sync
- UL60730 certified for electrical safety
- IP44 rated wall mount enclosure
Specifications
| Type | Wall Mount, Crimp |
|---|---|
| Voltage | 12 |
| Amps | 3.75 amps |
| Compatibility/Fitment | Amazon Alexa, Google Assistant |
| Timing Range | Full Control |
| Pole Configuration | Screw |
| Number of Receptacles | SPN10 |
| Receptacle Type | 3.75 amps, 120 volts |
| Size/Dimensions | 131 mm x 85 mm x 60 mm |
| Style | Crimp |
| Switch Type | Push Button |
| Maximum Time Setting | Full Control |
| Number of Poles | 1-way |
| Contact Form | 1-way |
| Enclosure Type | IP44, Wall Mount |
| Input Voltage | 120 volts |
| Mounting | Wall Mount |
| Operating Temperature Range | 32 degrees_fahrenheit to 104 degrees_fahrenheit |
| Features | Amazon Alexa, Google Assistant |
| Brand | ELEGRP |
| Model | SPN10 |
| Item Count | 12 pack |
| Commercial/Residential | Amazon Alexa, Google Assistant |
| Part Number | SPN10 |
Questions about this item
How much heat or noise does the SPN10 produce when it runs all day?
The switch operates silently with an exceptionally quiet rocker design and no clicking sound. It is rated for an operating temperature range of 32 to 104 degrees Fahrenheit and carries an IP44 enclosure rating.
What wiring must already be in place for the SPN10 to work?
A neutral wire is required in the wall box. The switch is single-pole only, rated for 120 volts and 3.75 amps, and mounts in a standard wall box with dimensions of 131 mm x 85 mm x 60 mm.
Will the SPN10 work alongside older lights or fans already on the same circuit?
Yes, it controls standard lighting loads up to 3.75 amps at 120 volts on a single-pole circuit. It supports manual, app, and voice control via Alexa or Google Assistant without replacing existing fixtures.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SIEMENS
SIEMENS 52PP2D2AB 30 mm Illuminated Push Button Red 24 V LED 1NO/1NC
$179.99
0.00209186BTC
In stock