Eaton
Eaton E34GFBC1-3X Mushroom Head Push Button 30 mm 1NC Black
A 30 mm mushroom head push button with 1NC contact rated 10A at 600V AC, IP65 and NEMA 4X protection
- Engine BrandEATON
- Engine Size30 mm
- 30 mm mushroom head enables fast emergency actuation
- 1NC contact rated 10 A at 600 V AC breaks circuits reliably
- IP65 and NEMA 4X ratings protect against dust and water jets
- Epoxy-coated metal construction passes 600-hour salt-spray test
- Certified to CE, UL, CSA and FDA standards
Industrial Control Operator
The Eaton E34GFBC1-3X is a 30 mm mushroom-head push button designed for industrial control panels. It provides a single normally-closed contact rated at 10 A and 600 V AC for emergency-stop or safety-interlock circuits. The black epoxy-coated metal head and zinc die-cast bezel meet NEMA 12, 13, 3, 3R, 4 and 4X as well as IP65 requirements.
Panel Integration
The operator mounts in a standard 30 mm cut-out and uses screw-clamp terminals for secure wiring without special tools. Its maintained or momentary action is selected during installation, letting one device serve either function. The 40 mm head diameter gives a clear actuation target while the compact body leaves space for adjacent operators or legend plates.
Environmental Durability
The epoxy coating passes a 600-hour salt-spray test, confirming resistance to corrosion in wash-down or outdoor environments. UL 508, UL 131568, CSA C22.2 No. 14 and CE EN 60947-5-1/5-5 certifications verify performance under sustained electrical and mechanical load. The sealed construction maintains contact integrity through repeated actuations in dusty or wet conditions.
Highlights
- 30 mm mushroom head enables fast emergency actuation
- 1NC contact rated 10 A at 600 V AC breaks circuits reliably
- IP65 and NEMA 4X ratings protect against dust and water jets
- Epoxy-coated metal construction passes 600-hour salt-spray test
- Certified to CE, UL, CSA and FDA standards
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
Will the 10 A contact rating hold up under continuous daily operation?
The contact is rated for 10 A at 600 V AC, so it handles sustained loads within that limit without degradation.
How much heat or noise does the operator generate when actuated repeatedly?
As a purely mechanical push button it produces no electrical noise and negligible heat during normal cycling.
What mounting cut-out and panel thickness are required for the 30 mm epoxy-coated metal bezel?
It fits a standard 30 mm panel cut-out and the screw-clamp terminals accept wire gauges typical for 10 A circuits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



