We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30 mm extended push button with epoxy coated metal head and bezel

Eaton

Eaton E34EX708B Push Button 30 mm Black Extended 10A 600V AC

SKU CH-7GCS-C94S5

A 30 mm black extended push button rated 10 A at 600 V AC with 1 NC and 1 NO contacts, NEMA 12, 13, 3, 3R, 4, 4X and IP65 protection

  • MaterialHAWA
  • Extended 30 mm operator enables gloved use
  • Momentary action with 1 NO and 1 NC contacts
  • Rated 10 A at 600 V AC and 2.5 A at 250 V DC
  • NEMA 12, 13, 3, 3R, 4, 4X and IP65 sealing
  • Epoxy-coated metal head and bezel resist chemicals

Hazardous Location Push Button

The Eaton E34EX708B is a 30 mm extended push button designed for hazardous locations. It features a momentary action operator with a black epoxy-coated metal head and bezel. The unit carries NEMA ratings 12, 13, 3, 3R, 4, and 4X alongside an IP65 rating. It is suited for industrial control panels requiring chemical-resistant components.

Contact Rating and Headroom

The switch provides one normally closed and one normally open contact form rated at 10A at 600V AC and 2.5A at 250V DC. NEMA contact designations A600 and Q300 define the applicable control circuit duty. This capacity handles typical motor starter and pilot duty loads within the stated voltage limits. Circuits exceeding these amperage or voltage values fall outside the rated headroom.

Screw Clamp Terminal Connection

Wiring is completed through screw clamp terminals that accept standard control conductors. The terminal style determines the installation method and tool requirement for secure connections. Installers must verify wire gauge compatibility with the clamp design before wiring. This connection type is the primary factor for integration into existing enclosures.

Highlights

  • Extended 30 mm operator enables gloved use
  • Momentary action with 1 NO and 1 NC contacts
  • Rated 10 A at 600 V AC and 2.5 A at 250 V DC
  • NEMA 12, 13, 3, 3R, 4, 4X and IP65 sealing
  • Epoxy-coated metal head and bezel resist chemicals

Specifications

MaterialHAWA
BrandEATON

Questions about this item

Will the 30 mm mounting hole of this push button line up with the panel cut-outs on my existing control board?

Yes, the operator is a standard 30 mm extended push button, so it fits the same cut-out used by most legacy 30 mm stations.

How can I verify the 10 A 600 V AC contacts are operating correctly once the unit is wired?

Actuate the button and measure continuity across the 1 NO and 1 NC screw-clamp terminals; the normally-open should close and the normally-closed should open with each press.

Does the package include the epoxy-coated metal bezel and mounting hardware, or do I need to order them separately?

The bezel is factory-fitted to the operator; only the panel mounting nut and any legend plate are supplied separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.