We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 22mm panel indicator light with flush LED lens

Eaton

Eaton C22-L-Y-24 Indicator Light Yellow 24VAC/DC 22mm

SKU CH-04QW-C7P03

22 mm yellow LED panel indicator for 24 V AC/DC supplies IP67 and IP69K protection with 100 000 hour rated life

  • Engine BrandEATON
  • Engine Size22mm Mounting dia
  • 22 mm mounting fits standard panels
  • Yellow LED draws 20 mA at 24 V AC/DC
  • IP67 and IP69K sealing resists water and high-pressure washdown
  • 100 000 hour average life reduces replacement frequency
  • UL listed and CSA certified to EN 60947 / IEC 60947 standards

Product Identity

The Eaton C22-L-Y-24 is a 22 mm flush-mounted LED indicator light designed for industrial control panels and machinery. It provides clear visual status signalling in yellow for operators and maintenance staff.

Capacity and Headroom

The unit draws 20 mA at 24 V AC/DC and offers an average life of 100,000 hours. It fits panels up to 0.930 in thick and meets NEMA 13 and 4X as well as IP67 and IP69K for wash-down environments.

Interface Limits

Connection uses a terminal clamp suitable for standard wiring. The product complies with CSA, EN 60947, IEC 60947 and UL Listed standards, defining its approved voltage and environmental boundaries.

Highlights

  • 22 mm mounting fits standard panels
  • Yellow LED draws 20 mA at 24 V AC/DC
  • IP67 and IP69K sealing resists water and high-pressure washdown
  • 100 000 hour average life reduces replacement frequency
  • UL listed and CSA certified to EN 60947 / IEC 60947 standards

Specifications

Engine BrandEATON
Engine Size22mm Mounting dia

Questions about this item

Will the 22 mm mounting diameter fit the same panel cut-out as my existing 22 mm push-buttons?

Yes, the 22 mm mounting diameter matches standard 22 mm panel cut-outs used by most industrial push-buttons and pilot lights.

How can I verify the yellow LED is operating correctly once installed?

Apply 24 V AC or DC; the LED should draw about 20 mA and show a steady yellow glow, with an expected life of 100 000 hours.

Does the package include the terminal clamp and sealing gasket, or must I order them separately?

The terminal clamp is integrated into the body; a panel gasket for the 0.930 in thickness is supplied, so no extra parts are needed for a NEMA 13 / IP67, IP69K seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.