Eaton
Eaton C22-L-R-24 Raised Indicator Light Red 24VAC/DC 22mm
A 22 mm red LED panel indicator for 24 V AC/DC, rated IP67 and IP69K with a 100,000-hour life
- Engine BrandEATON
- Engine Size22mm Mounting dia
- Reliable status indication with 24 V AC/DC operation
- Clear red LED visible in bright environments
- Secure 22 mm panel mount fits standard cut-outs
- Sealed to IP67 and IP69K for harsh conditions
- Long 100 000 hour life reduces maintenance intervals
Eaton 22 mm Raised Indicator Light
This Eaton C22-L-R-24 is a red LED indicator designed for 24 V AC/DC industrial panels. It fits a standard 22 mm mounting diameter and uses terminal-clamp connections for secure wiring. The polycarbonate lens provides a flush, round profile suitable for control panels and machinery interfaces.
Environmental limits of the IP67 and IP69K ratings
The light withstands temporary immersion and high-pressure, high-temperature washdowns thanks to its IP67 and IP69K ratings. NEMA 13 and 4X ratings confirm protection against dust, spraying water, oil and corrosion. These standards define the practical sealing limits for harsh industrial environments.
20 mA current draw at 24 V
The unit draws 20 mA when powered at its rated 24 V AC/DC, determining the load on the control circuit. An average life of 100,000 hours supports long-term installation without frequent replacement. This current figure is the key specification for verifying compatibility with your panel power budget.
Highlights
- Reliable status indication with 24 V AC/DC operation
- Clear red LED visible in bright environments
- Secure 22 mm panel mount fits standard cut-outs
- Sealed to IP67 and IP69K for harsh conditions
- Long 100 000 hour life reduces maintenance intervals
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 22mm Mounting dia |
Questions about this item
Should I pick the 22 mm version or a different mounting diameter?
This indicator light uses a 22 mm mounting diameter, so choose it when your panel cut-out matches that size.
What does the 20 mA current draw mean once the light is installed?
At 24 V AC/DC the LED draws 20 mA, giving low power consumption and minimal heat in the panel.
What do the NEMA 13, 4X and IP67/IP69K ratings cap in practice?
They certify the light against dust, water jets, high-pressure wash-down and oil, so it survives harsh industrial environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



