We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 22mm raised indicator light with round polycarbonate lens

Eaton

Eaton C22-L-B-120 Raised Indicator Light Blue 120VAC 22mm

SKU CH-9YZM-8NEFG

A 22 mm blue LED panel light rated for 120 V AC with IP67 and IP69K sealing

  • Engine BrandEATON
  • Engine Size22mm Mounting dia
  • Reliable panel status with 100,000-hour LED life
  • Withstands wash-down environments rated IP67 and IP69K
  • Fits standard 22mm cut-outs for quick installation
  • Operates on 120V AC drawing only 20 mA
  • Certified to UL, CSA and IEC 60947 standards

Industrial panel indicator

The Eaton C22-L-B-120 is a 22mm flush-mounted LED pilot light for 120V AC control panels. Its polycarbonate lens emits blue illumination drawing 20 mA. Rated IP67 and IP69K with NEMA 13 and 4X enclosure protection, it suits harsh industrial environments. Certified to CSA, EN 60947, IEC 60947 and UL Listed standards.

Sustained operation profile

Continuous duty at 120V AC maintains steady luminance without thermal derating. The LED averages 100,000 hours of service life under rated voltage. Low 20 mA current draw minimises heating inside dense panel layouts. Terminal clamp connections resist vibration loosening during prolonged equipment cycles.

22mm mounting constraints

Panel cutout must accept 22mm diameter with thickness up to 0.930 in for secure fit. Terminal clamps accommodate solid or stranded wire within the device's electrical rating. IP69K rating permits high-pressure washdown but does not imply submersion capability. Compliance with EN 60947 and IEC 60947 covers industrial control circuit requirements.

Highlights

  • Reliable panel status with 100,000-hour LED life
  • Withstands wash-down environments rated IP67 and IP69K
  • Fits standard 22mm cut-outs for quick installation
  • Operates on 120V AC drawing only 20 mA
  • Certified to UL, CSA and IEC 60947 standards

Specifications

Engine BrandEATON
Engine Size22mm Mounting dia

Questions about this item

How much heat does the 20 mA LED draw produce when the indicator runs continuously?

At 20 mA and 120 V AC the indicator dissipates only a few watts, so heat output is negligible for panel installations.

What panel cut-out and thickness does the 22 mm mounting diameter require?

The light fits a 22 mm diameter cut-out in panels up to 0.930 in thick and secures with the supplied terminal clamp.

Will the IP67 and IP69K seals survive vibration from older generator sets mounted on the same panel?

The polycarbonate housing meets NEMA 13, 4X, IP67 and IP69K, so it resists water jets, high-pressure wash-down and vibration in industrial environments.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.