Eaton
Eaton 10250T5B62-71X Cutler-Hammer Emergency Stop Push Button 30 mm Red Head
30 mm red metal mushroom-head emergency stop button with 1NC contact rated 10A at 600V AC, IP65 and NEMA 4X protection
- Engine BrandEATON
- Engine Size30 mm
- Emergency stop with 40 mm mushroom head for fast actuation
- 10 A at 600 V AC contact rating handles heavy loads
- NEMA 12, 13, 3, 3R, 4, 4X and IP65 seal resists dust and water
- Chrome-plated zinc die-cast bezel and metal head withstand harsh environments
- Factory-assembled unit with screw-clamp terminals simplifies installation
Emergency Stop Button 30 mm
This Eaton 10250T5B62-71X is a 30 mm emergency stop push button with a maintained action and a 40 mm red mushroom head. The metal head and chrome-plated zinc die-cast bezel suit industrial panels that need a clearly visible stop control. It carries CE, CSA and UL listings plus NEMA 12, 13, 3, 3R, 4, 4X and IP65 ratings for harsh environments. Screw-clamp terminals accept standard wiring for straightforward installation.
Factory Assembled Contact Block
The unit ships factory assembled with a single 1NC contact rated at 10A at 600V AC. No separate contact block or legend plate is required, reducing panel assembly time. The maintained operator stays latched until deliberately reset, matching safety circuits that demand a positive restart action. Metal construction resists impact and corrosion in demanding applications.
1NC 10A 600V AC Rating
The decisive specification is the 1NC contact rated 10A at 600V AC, which determines whether the button can break your emergency-stop circuit safely. Verify that your control voltage and current stay within this rating before specifying the part. If your circuit demands a different contact form, higher current or a different voltage class, this model will not meet the requirement.
Highlights
- Emergency stop with 40 mm mushroom head for fast actuation
- 10 A at 600 V AC contact rating handles heavy loads
- NEMA 12, 13, 3, 3R, 4, 4X and IP65 seal resists dust and water
- Chrome-plated zinc die-cast bezel and metal head withstand harsh environments
- Factory-assembled unit with screw-clamp terminals simplifies installation
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
Will the mushroom head or internal contacts need periodic replacement?
The 40 mm metal mushroom head and 1NC contact block are factory assembled; no user-serviceable parts are identified.
What stops the button from operating continuously in a dusty, wet environment?
NEMA 12, 13, 3, 3R, 4, 4X and IP65 ratings seal the 30 mm operator against dust and water ingress.
Does the screw-clamp terminal generate noticeable heat at the 10 A, 600 V AC rating?
The contact rating is 10 A @ 600 V AC; the screw-clamp connection is designed for that load without special cooling.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



