Eaton
Eaton 10250T27G 30mm Green Mushroom Push Button
A 30 mm green mushroom push button with momentary action, 1NO contact rated 10A at 600V AC, and IP65 protection
- Engine BrandEATON
- Engine Size30 mm
- Green mushroom head for clear emergency identification
- 30 mm mounting size fits standard industrial panels
- Momentary action with 1NO contact rated 10A at 600V AC
- IP65 and NEMA 4X sealing resists dust and water ingress
- Metal construction with diaphragm seals and enclosed silver contacts for durability
30 mm Green Mushroom Push Button
The Eaton 10250T27G is a non-illuminated 30 mm mushroom push button with momentary action. It features a 65 mm metal mushroom head, chrome-plated zinc die-cast bezel, and a single normally open contact rated at 10A @ 600V AC.
Industrial control panels needing a rugged green
Suits panels requiring NEMA 12, 13, 3, 3R, 4, 4X and IP65 sealing with diaphragm seals and drainage holes. Not for applications needing an illuminated head, a maintained latching action, or a different colour coding scheme.
Panel-mount operator for starter or safety circuits
Mounts in a standard 30 mm cut-out using screw-clamp terminals for wiring. The enclosed silver contacts, grounding nibs and reliability nibs provide durable switching. CE, CSA and UL Listed certifications support compliance in regulated installations.
Highlights
- Green mushroom head for clear emergency identification
- 30 mm mounting size fits standard industrial panels
- Momentary action with 1NO contact rated 10A at 600V AC
- IP65 and NEMA 4X sealing resists dust and water ingress
- Metal construction with diaphragm seals and enclosed silver contacts for durability
Specifications
| Engine Brand | EATON |
|---|---|
| Engine Size | 30 mm |
Questions about this item
What voltage rating must the control circuit not exceed for this 10A contact?
The contact is rated for 10A at up to 600V AC, so the circuit voltage must stay at or below 600V AC.
Will this 30mm operator fit the same panel cut-out as my existing 30mm push buttons?
Yes, it uses the standard 30mm mounting diameter common to 30mm industrial operators.
How can I verify the NEMA 4X and IP65 seals are intact after installation?
Inspect the diaphragm seal and drainage holes for damage, then confirm the chrome-plated bezel sits flush with the panel gasket.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



