Dyno Racing
Dyno Racing 85mm GPS Speedometer 200km/h Tachometer Gauge
An 85 mm GPS speedometer and tachometer displaying speed, course angle and mileage with IP67 protection for 12 V or 24 V vehicles
- TypeGauges
- Gauge TypeTachometer
- Precise readings with stepper-motor movement
- Fog-free visibility through curved anti-fog glass
- Vibration-proof connection via snap-lock harness
- Speed, heading and distance in one gauge
- IP67 rated for water and dust resistance
Universal 85mm GPS Speedometer
The Dyno Racing 85mm GPS speedometer combines a tachometer with GPS-based speed, course angle and mileage readouts in one gauge. It fits a standard 85mm panel cut-out and operates on 12V or 24V electrical systems in cars, trucks or boats. Stepper-motor movement gives precise needle response with low power draw. The unit is rated IP67 for water and dust resistance.
200km/h range with triple display
The gauge shows speed up to 200km/h alongside heading and distance data on its LCD. Stepper motors maintain accuracy across the full sweep while consuming minimal current. Curved glass with an anti-fog coating keeps the face readable in humid or cold conditions. A locking harness connector prevents vibration from disrupting the signal.
IP67 sealing for harsh environments
The IP67 rating means the instrument withstands immersion and dust ingress without extra sealing work. Operating temperature spans -30 to 75°C, while storage tolerance reaches -40 to 85°C. The sealed case and snap-lock connector keep moisture and grit out of the movement. No active cooling is required, so the gauge runs silently.
Highlights
- Precise readings with stepper-motor movement
- Fog-free visibility through curved anti-fog glass
- Vibration-proof connection via snap-lock harness
- Speed, heading and distance in one gauge
- IP67 rated for water and dust resistance
Specifications
| Type | Gauges |
|---|---|
| Gauge Type | Tachometer |
Questions about this item
Will the 85 mm cut-out fit my existing dashboard opening?
The gauge requires an 85 mm diameter hole with a small notch for the alignment tab; if your current opening matches that size it will mount directly.
How can I confirm the GPS speedometer is reading accurately after installation?
Power the unit on a 12 V or 24 V system, drive at a known speed and compare the LCD readout to a trusted reference; the stepper motor should move smoothly across the full 200 km/h scale.
Does the package include the wiring harness and mounting ring, or must I buy them separately?
The box contains the gauge, a snap-together harness connector and the fixed mounting ring; no additional parts are needed for a standard 12 V or 24 V installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



