We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon-steel 1-inch two-way ball valve with locking lever handle

Dynaquip Controls

Dynaquip Controls VAE2.N00P 1 in Manual 2-Way Ball Valve

SKU CH-XZ4E-48DHM

A carbon-steel, full-port ball valve with a locking handle rated for 600 psi and 29 in Hg vacuum service

  • Full-port design maximises flow capacity
  • Locking handle prevents accidental operation
  • Carbon steel body rated to 600 psi
  • Three-piece construction simplifies maintenance
  • Suitable for vacuum service down to 29 in Hg

Manual Two-Way Ball Valve

The Dynaquip Controls VAE2.N00P is a manual two-way ball valve built with a carbon-steel body and a chrome-plated carbon-steel ball. It uses a full-port design in a three-piece straight body and features a locking handle for secure operation. The valve is rated for water media and new condition.

Before ordering

Verify that your piping uses a 1 inch nominal size and SAE connections to match this valve. Confirm the system pressure does not exceed 4 600 psi operating pressure and that vacuum requirements stay within 29 in Hg. Ensure carbon-steel construction is compatible with the intended media and that the three-piece straight body fits the available space.

Locking handle and full port

The locking handle allows the operator to secure the valve in the open or closed position, reducing the risk of accidental actuation. The full-port ball provides an unrestricted flow path that minimises pressure drop across the valve. The three-piece construction enables easier disassembly for cleaning or seal replacement without removing the valve from the line.

Highlights

  • Full-port design maximises flow capacity
  • Locking handle prevents accidental operation
  • Carbon steel body rated to 600 psi
  • Three-piece construction simplifies maintenance
  • Suitable for vacuum service down to 29 in Hg

Specifications

BrandDYNAQUIP CONTROLS

Questions about this item

What comes in the box with the Dynaquip Controls VAE2.N00P valve and do I need to buy fittings separately?

The valve ships as a complete unit with its locking handle installed. Threaded SAE end connections are integral to the carbon steel body, so separate fittings are only required if your piping uses a different thread standard.

How do I decide between the full-port and a reduced-port version of this 1 in valve?

This model is only offered as a full-port design; the bore matches the 1 in nominal size for unrestricted flow. If a reduced-port option is needed, a different part number must be sourced.

What does the 4,600 psi operating pressure mean when the valve is installed in my water system?

It is the maximum continuous pressure the carbon steel body and chrome-plated ball can withstand at ambient temperature. System relief devices should be set below this limit to avoid over-pressure damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.