We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver palm-style air sander with 6-inch pad and rear exhaust

Dynabrade Products

Dynabrade Products 59010 Air Random Orbital Sander 0.25 hp 6 in

SKU CH-6Z60-6BS9Y

Air random orbital sander with a 6 in pad, 0.25 hp motor and 12,000 rpm free speed for industrial finishing work

  • MaterialHAWA
  • 25 hp motor delivers consistent sanding power
  • 12,000 RPM free speed enables rapid material removal
  • 3/8 in orbit diameter produces smooth swirl-free finishes
  • 5 cfm average air consumption suits standard compressors
  • Rear exhaust directs airflow away from the work surface

6 in Random Orbital Sander

This 6 in air random orbital sander is built for finish sanding on wood, metal and composite surfaces in professional workshops. The 0.25 hp motor drives a 3/8 in orbit diameter at 12,000 RPM free speed, producing a swirl-free pattern suited to prep and final finishing tasks.

Sustained air demand

Under continuous operation the tool draws 14 cfm at 90 psi, significantly more than the 3.5 cfm average measured during a 15 second test run. A compressor and supply line capable of delivering the full-load flow are required to maintain speed and orbit consistency throughout extended sanding sessions.

1/4 in NPT air inlet

The 1/4 in NPT inlet and minimum 1/4 in hose size set the practical airflow ceiling; undersized fittings or long hose runs will restrict volume and reduce performance at the 90 psi operating pressure. The rear exhaust directs spent air away from the workpiece without additional ducting.

Highlights

  • 25 hp motor delivers consistent sanding power
  • 12,000 RPM free speed enables rapid material removal
  • 3/8 in orbit diameter produces smooth swirl-free finishes
  • 5 cfm average air consumption suits standard compressors
  • Rear exhaust directs airflow away from the work surface

Specifications

BrandDYNABRADE
MaterialHAWA

Questions about this item

How loud and hot does the 0.25 hp motor run during a full day of sanding?

The palm-style sander vents through a rear exhaust; at 12 000 RPM free speed it moves 3.5 cfm average and 14 cfm at full load, so heat and noise stay moderate for an air tool.

What air supply fittings and hose must I already have to connect the 1/4 in NPT inlet?

You need a compressor regulated to 90 psi, a minimum 1/4 in hose, and a standard 1/4 in NPT quick-coupler to feed the sander.

Will the 5/16 in.-24 spindle accept the 6 in pads I already own for my older orbital sander?

Yes — the spindle is 5/16 in.-24, matching the common industry thread for 6 in vinyl or hook-face pads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.