We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dynabrade 50350 angle grinder, composite handle, side exhaust, lever throttle

Dynabrade Products

Dynabrade Products 50350 Type 27 Angle Grinder pneumatic components power

SKU CH-CX3V-TQR87

A heavy-duty pneumatic angle grinder for Type 27 wheels runs at 6,000 RPM with 1.2 hp and a 1/2 in NPT air inlet

  • Delivers high-torque grinding with 1.2 hp motor
  • Reaches 6,000 RPM free speed for fast material removal
  • Accepts 7-inch Type 27 wheels for versatile applications
  • Operates at 90 psi with 10.75 CFM average consumption
  • Includes 11399 mounting adapter kit with flanges and hex wrench

Dynabrade 50350 Type 27 Angle Grinder

The Dynabrade 50350 is a pneumatic angle grinder built for heavy-duty material removal. It runs at a free speed of 6,000 RPM with a 1.2 hp motor and accepts a 7 in Type 27 wheel. The tool connects via a 1/2 in NPT female air inlet and requires 90 psi operating pressure.

Heavy-duty grinding vs precision work

This grinder suits operators who need sustained power for weld removal, deburring or surface preparation in industrial settings. The composite handle and side exhaust improve comfort during extended use. It is not for buyers who need variable speed control or a lightweight tool for fine finishing.

1/2 in NPT inlet and 43.0 CFM demand

The single specification that decides fit is the air supply: the tool needs a 1/2 in NPT connection and draws 43.0 CFM at full load with a minimum 1/2 in hose. If your compressor or piping cannot deliver that flow at 90 psi, the grinder will not reach rated performance.

Highlights

  • Delivers high-torque grinding with 1.2 hp motor
  • Reaches 6,000 RPM free speed for fast material removal
  • Accepts 7-inch Type 27 wheels for versatile applications
  • Operates at 90 psi with 10.75 CFM average consumption
  • Includes 11399 mounting adapter kit with flanges and hex wrench

Specifications

BrandDYNABRADE

Questions about this item

How can I confirm the grinder is running at the rated 6,000 RPM free speed after connecting it?

Verify the air supply delivers a steady 90 psi at the 1/2 in NPT inlet and that the hose meets the 1/2 in minimum size; the tool should reach 6,000 RPM under no load when the throttle lever is fully depressed.

What components are included with the 50350 and what must be supplied separately?

The box contains the angle grinder, the 11399 Type 27 wheel mounting adapter kit, front and rear flanges, and a hex wrench; you must provide a 1/2 in air hose, a 90 psi compressed-air source, and Type 27 grinding wheels.

Which Type 27 wheel diameter matches this grinder's 7 in specification?

Select 7-inch diameter Type 27 wheels; the included 11399 adapter kit and flanges are designed for that exact wheel size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.