We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pneumatic orbital sander palm grip 6 inch disc hook loop pad model 56859

DYNABRADE

DYNABRADE 56859 Air Orbital Sander 6 in Palm .3 hp

SKU CH-4HZP-6K0A9

A 6-inch random orbital air sander with a gearless .3 hp motor, 3/32 in orbit and variable speed for heavy-duty finishing

  • Variable speed control for precise finishing
  • Gearless motor reduces maintenance downtime
  • Light 2 lb palm grip eases extended use
  • 3/32 in orbit produces fine swirl-free results
  • Runs on 18 cfm at 90 psi compressed air

Dynabrade 56859 Palm Sander

The Dynabrade 56859 is a pneumatic random orbital sander built for heavy-duty surface preparation. Its palm-grip design and .3 hp gearless motor suit professional technicians and serious DIY users who need consistent material removal on wood, metal or composite panels. Variable speed control lets the operator match the cutting action to the task.

Hook-and-loop mounting and rear exhaust

A hook-and-loop vinyl face accepts 6 in discs for quick changes without tools. The gearless motor reduces vibration and eliminates gear maintenance, while rear exhaust directs airflow away from the work surface. A 1/4 in NPT air inlet and 1/4 in minimum hose size connect to standard shop supply lines running at 90 psi.

Check air supply and disc compatibility

Verify your compressor can deliver 18 cfm continuously at 90 psi before ordering. The sander accepts only hook-and-loop discs in a 6 in diameter, so confirm your abrasive stock matches. No vacuum port is fitted, so dust extraction must be handled separately if required.

Highlights

  • Variable speed control for precise finishing
  • Gearless motor reduces maintenance downtime
  • Light 2 lb palm grip eases extended use
  • 3/32 in orbit produces fine swirl-free results
  • Runs on 18 cfm at 90 psi compressed air

Specifications

BrandDYNABRADE

Questions about this item

What air supply does the 1/4 in NPT inlet on the 56859 require?

The sander needs 90 psi at the tool and a hose that can deliver 18 cfm to maintain full speed under load.

What pad and backup combination fits the 6 in hook-and-loop face?

Any 6 in hook-and-loop disc with a matching vinyl backup pad rated for the 3/32 in orbit will mount directly.

How is the tool connected to the air line and what step is often missed?

Thread the 1/4 in NPT fitting into the rear inlet, use a 1/4 in minimum hose, and add a few drops of air-tool oil before first use — the oiling step is the one most people skip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.