We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver right-angle pneumatic disc sander with 2 inch adhesive pad, compact metal body, rear exhaust, 1/4 inch NPT air inlet

DYNABRADE

DYNABRADE 49410 Air Disc Sander 0.4 HP 2 In

SKU CH-X6JY-KJY4A

Pneumatic right-angle disc sander with a 2 in adhesive pad running at 3,200 RPM from a 0.4 hp motor at 90 psi

  • 4 hp motor delivers heavy-duty sanding power
  • 3,200 RPM fixed speed for consistent material removal
  • 2-inch adhesive disc mount enables quick abrasive changes
  • 26 cfm air consumption at 90 psi for efficient operation
  • Right-angle grip design improves control in tight spaces

0.4 HP air disc sander for industrial use

The DYNABRADE 49410 is a pneumatic right-angle disc sander built for heavy-duty applications. It runs on compressed air at 90 psi and consumes 26 cfm. A fixed-speed motor delivers 200 rpm to the 2 in pad. The tool accepts adhesive-backed abrasives only.

Installation needs a 1/4 in hose and NPT inlet

Connect the 1/4 in NPT air inlet to a supply line rated for at least 26 cfm at 90 psi. Use a minimum 1/4 in hose to avoid pressure drop. The spindle uses a 1/4-20 thread for the included pad. No vacuum port is fitted, so dust extraction must be handled separately.

Check air supply and abrasive compatibility

Verify your compressor can sustain 26 cfm continuously at 90 psi. Ensure the airline includes a regulator and lubricator suited to pneumatic tools. Only 2 in adhesive-backed discs fit the pad; hook-and-loop or bolt-on abrasives will not mount. The fixed 200 rpm speed cannot be adjusted for different materials.

Highlights

  • 4 hp motor delivers heavy-duty sanding power
  • 3,200 RPM fixed speed for consistent material removal
  • 2-inch adhesive disc mount enables quick abrasive changes
  • 26 cfm air consumption at 90 psi for efficient operation
  • Right-angle grip design improves control in tight spaces

Specifications

BrandDYNABRADE

Questions about this item

How do I confirm the sander is running at the correct speed after setup?

Listen for smooth, consistent motor sound and verify the disc spins freely at the fixed 3,200 RPM rating under 90 psi air pressure.

What accessories come with the sander and what must I purchase separately?

The tool includes a 2 in adhesive mounting pad; you must supply 2 in adhesive-backed abrasive discs, a 1/4 in NPT air hose rated for 26 cfm, and a 90 psi compressed-air source.

Which pad size matches the sander’s fixed specifications?

Only the 2 in pad is compatible because the spindle thread is 1/4 in.-20 and the speed is fixed at 3,200 RPM for that diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.