We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Long silver masonry drill bit with black oxide shank and carbide tip

Drill America

Drill America DAM18X3/4 Carbide-Tipped Masonry Bit 18

SKU CH-EYCR-VVJ1A

Carbide-tipped masonry bit drills brick, concrete and sandstone with 18-inch reach and 118-degree point

  • TypeDrill Accessories
  • Carbide tip resists wear in hard masonry
  • 18 inch overall length reaches deep holes
  • 118 degree point centres quickly on contact
  • Black oxide finish reduces corrosion on the bit
  • Wide spiral flutes clear dust fast in soft material

Drill America DAM18X3/4 Masonry Bit

The Drill America DAM18X3/4 is a carbide-tipped masonry drill bit built for professionals and DIY users who need to bore deep holes in brick, concrete or sandstone. Its 18-inch overall length and 3/4-inch cutting diameter suit anchor-screw, expansion-shield and toggle-bolt installations in structural work.

Thermals Noise and Power Draw

As a non-powered accessory the bit generates no electrical noise and draws no power from the drill motor beyond the mechanical load of cutting. Heat at the carbide tip is managed by the wide spiral flutes that eject dust quickly, reducing friction buildup during extended use in softer masonry.

Black Oxide Finish and Shank Benefits

The black oxide coating adds corrosion resistance and reduces galling when the bit runs in a portable electric drill. The 1/2-inch round shank fits standard three-jaw chucks without adapters, and the 118-degree conventional point centres the hole cleanly so anchors seat flush.

Highlights

  • Carbide tip resists wear in hard masonry
  • 18 inch overall length reaches deep holes
  • 118 degree point centres quickly on contact
  • Black oxide finish reduces corrosion on the bit
  • Wide spiral flutes clear dust fast in soft material

Specifications

BrandDrill America
TypeDrill Accessories

Questions about this item

How do I install the 1/2" round shank into my drill and what step do people get wrong?

Open the chuck fully, insert the 1/2" round shank straight, then tighten securely; the common mistake is not seating the shank deep enough, which causes wobble and premature carbide wear.

What maintenance or replacement will this masonry bit need later?

The carbide tip cannot be sharpened easily; replace the bit once the tip dulls or chips from drilling brick, concrete or sandstone, as continued use overheats the steel body.

What limit appears first during sustained drilling with this 18" bit?

Heat buildup in the steel body behind the carbide tip becomes the limiting factor; wide flutes remove dust quickly, but prolonged use in hard concrete still transfers heat faster than the bit can dissipate it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.