We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Dri-Eaz

Dri-Eaz F174-BLU Axial Blower Blue 115V 1hp 2041cfm

SKU CH-FVWS-757Z2

Delivers 2,041 cfm horizontal airflow with a 1 hp, 115 V motor and a 20 ft cord

  • ColorTransparent
  • High airflow reaches 2,041 cfm for rapid drying
  • 1 hp motor delivers consistent power on a single speed
  • 20 ft cord extends reach across large work areas
  • CSA certified and ETL listed to UL/cUL standards for safety
  • Compact 19 in height fits tight spaces and stores easily

Dri-Eaz 1 hp axial blower

The Dri-Eaz F174-BLU is a 115 V AC axial blower rated at 1 hp and 2 041 cfm maximum airflow. It operates at a single speed with horizontal air discharge only and no pivoting nozzle. The unit carries CSA certification and ETL listing to UL/cUL standards for jobsite safety.

Sustained airflow on 20 ft cord

A 7.4 A full-load draw at 60 Hz feeds the 12 11/16 in blower wheel continuously without daisy-chain or GFCI provisions. The 20 ft power cord terminates in a NEMA 5-14P plug, allowing direct connection to standard circuits while the fixed horizontal outlet maintains a steady stream across wet surfaces.

Replaces smaller low-cfm fans

Builders moving up from compact circulation fans gain the 2 041 cfm capacity needed for carpet drying and structural drying in a single pass. The step up is justified when a single-speed, high-volume airflow cuts overall drying time on large water-loss jobs.

Highlights

  • High airflow reaches 2,041 cfm for rapid drying
  • 1 hp motor delivers consistent power on a single speed
  • 20 ft cord extends reach across large work areas
  • CSA certified and ETL listed to UL/cUL standards for safety
  • Compact 19 in height fits tight spaces and stores easily

Specifications

BrandDRI-EAZ
ColorTransparent

Questions about this item

How much heat and power does the 1 hp motor draw when running all day?

The 1 hp motor draws 7.4 A at 115 V AC, 60 Hz, with a 20 ft cord and NEMA 5-14P plug.

What electrical supply must already be on site for the blower to operate?

A standard 115 V AC, 60 Hz circuit with a NEMA 5-14P receptacle is required; no GFCI protection is built in.

Will the 2,041 cfm airflow work alongside older 12 in ducting and 15 A circuits?

The 12 11/16 in wheel diameter matches common 12 in duct, and the 7.4 A draw fits a 15 A circuit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.