diymore Outlet Heater GXAB0002-006 HVAC Control
Plug-in thermostat controls heaters or coolers up to 1800 W with ±1 °F accuracy from -40 °F to 248 °F
- Typesensor, Cooling,heating, Hand Control
- Size/Dimensions0.78 in x 2 in x 4 in
- ColorPlug in Digital Thermostat
- Voltage220V
- Mount TypeWall Mount
- Relay Contactreptile thermostat, 220 volts
- Plug in and control temperature in 30 seconds
- Maintains ±1 °F precision automatically 24/7
- Powers heaters and coolers up to 1800 W safely
- Remembers settings after outages with 99‑hour timers
- Operates reliably from -40 °F to 248 °F
Plug-in Temperature Controller
The diymore Outlet Heater GXAB0002-006 is a digital thermostat that plugs directly into a mains socket. It controls heaters or coolers up to 1800 W for RV climate, reptile terrariums, greenhouses, incubators and similar temperature-controlled systems.
Quick Setup with Long Sensor
Installation requires no wiring; simply plug the load into the controller and insert the 1.7 m probe where temperature must be measured. The unit mounts on a wall and stores all settings during power outages, but the 220 V rating means it cannot be used on 120 V circuits without a suitable transformer.
Relay Limits and Environmental Range
The internal relay handles resistive loads up to 15 A at 220 V, with a maximum connected power of 1800 W. Operation is specified from -40 °F to 248 °F, and timing functions run for up to 99 hours. Loads exceeding the rated current or voltage will trip the protection and stop the output.
Highlights
- Plug in and control temperature in 30 seconds
- Maintains ±1 °F precision automatically 24/7
- Powers heaters and coolers up to 1800 W safely
- Remembers settings after outages with 99‑hour timers
- Operates reliably from -40 °F to 248 °F
Specifications
| Type | sensor, Cooling,heating, Hand Control |
|---|---|
| Brand | diymore |
| Model | Outlet Heater |
| Size/Dimensions | 0.78 in x 2 in x 4 in |
| Color | Plug in Digital Thermostat |
| Voltage | 220V |
| Mount Type | Wall Mount |
| Relay Contact | reptile thermostat, 220 volts |
| Item Count | 12 pack |
| Selling Unit | 1, sensor |
| Features | diymore |
| Part Number | GXAB0002-006 |
Questions about this item
How do I verify the diymore GXAB0002-006 is maintaining the correct temperature after plugging it in?
The bright LED screen displays the current reading from the 1.7 m sensor probe; if it stays within ±1 °F of your set point the controller is working as intended.
What comes in the 12-pack box and what must I supply myself?
The box contains twelve plug-in controllers each with a 6-foot sensor cord; you provide the heater, cooler or other 220 V load up to 1800 W.
Should I choose the 120 V or 220 V version for a 15 A circuit?
This model is the 220 V version rated for 1800 W, so select it when your supply is 220 V and the load does not exceed 15 A.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



