We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent HVLP spray gun with 1.5 mm nozzle and cleaning kit

DeVilbiss

DeVilbiss FLG-HVP-315 HVLP Sprayer 1.5 mm 13.5 cfm

SKU CH-5Y0B-D2BNN

HVLP spray gun with a 1.5 mm nozzle, 13.5 cfm air consumption at 23 psi, 13 in pattern, 1/4 in air inlet and included cleaning kit

  • ColorTransparent
  • HVLP technology reduces overspray for cleaner finishes
  • 5 mm nozzle handles medium-viscosity coatings with precision
  • 5 cfm at 23 psi delivers consistent atomisation
  • 13 in pattern width covers panels efficiently
  • Includes cleaning kit for immediate maintenance

Sprayer for medium fluid delivery

The DeVilbiss FLG-HVP-315 is an HVLP spray gun built for pressure-fed applications. It suits painters who need a 1.5 mm nozzle and a 13 in pattern size for medium-viscosity coatings. The gun connects to a 1/4 in air inlet and includes a cleaning kit for maintenance. It works with fluid cups such as the 80-295, 80-600 and 83C-220.

Air consumption at 23 psi

The sprayer draws 13.5 cfm at 23 psi inlet pressure during normal operation. This air demand matches typical shop compressors sized for medium-duty finishing work. The HVLP design keeps overspray low while maintaining consistent atomisation across the pattern. Fluid delivery speed is rated medium for controlled coverage.

1.5 mm nozzle for medium coatings

The 1.5 mm nozzle orifice determines the maximum particle size the gun can pass without clogging. Buyers spraying heavier materials such as high-build primers or textured finishes will need a larger orifice not offered by this model. The fixed nozzle size also limits the minimum film thickness achievable on thin substrates. Check coating manufacturer data to confirm compatibility before purchase.

Highlights

  • HVLP technology reduces overspray for cleaner finishes
  • 5 mm nozzle handles medium-viscosity coatings with precision
  • 5 cfm at 23 psi delivers consistent atomisation
  • 13 in pattern width covers panels efficiently
  • Includes cleaning kit for immediate maintenance

Specifications

BrandDEVILBISS
ColorTransparent

Questions about this item

How do I connect the air supply to the 1/4 in inlet without causing a leak?

Tighten the fitting onto the 1/4 in air inlet just enough to seat the threads, then give a slight final turn with a wrench; overtightening strips the brass threads and is the most common cause of leaks.

Which parts will need replacing after extended spraying with the 1.5 mm nozzle?

The needle, nozzle tip and air-cap gaskets wear first; the included cleaning kit has the brushes and picks needed to keep passages clear between replacements.

At what point does the 13.5 cfm air demand start to drop off during a long job?

If the compressor cannot hold 23 psi continuously, the gun will sputter and the 13 in pattern will narrow — that pressure loss is the first limit you hit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.