We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray DEVCON 10710 epoxy adhesive jar with resin and hardener

DEVCON

DEVCON 10710 Epoxy Adhesive Applicator Gray Jar 5:01 Mix Ratio 16 hr

SKU CH-BPMF-38102

Two-part epoxy adhesive in a gray jar offers a 5:1 mix ratio, 75-minute working time and full cure in 16 hours for interior or exterior metal bonding

  • TypeSealing Compound
  • 5:01 mix ratio simplifies precise two-part blending
  • 75-minute working time allows careful positioning
  • Self-leveling liquid flows into gaps for full coverage
  • Machinable cured epoxy enables post-cure drilling or tapping
  • Zero VOC content meets strict indoor air standards

Two-Part Epoxy for Metal Repairs

DEVCON 10710 is a gray, marine-grade epoxy adhesive supplied as resin and hardener in a jar. The low-viscosity, self-leveling liquid flows into gaps and cures at ambient temperature to a machinable, castable solid with low shrinkage and low odor. It bonds metal for interior or exterior structural repairs.

Working Time and Temperature Limits

The mixed adhesive remains workable for 75 minutes, giving ample time to position parts before the cure begins. Application must occur at or below 90 degrees Fahrenheit to maintain reliable handling and cure performance. The cured bond is water-resistant and contains zero VOCs by weight.

5:1 Mix Ratio and 16-Hour Cure

A precise 5:1 mix ratio by volume controls the cross-linking reaction that determines final strength. The system reaches full cure in 16 hours at room temperature, producing a gray, machinable joint. Buyers who need a faster turnaround or a different mix ratio cannot meet those requirements with this product.

Highlights

  • 5:01 mix ratio simplifies precise two-part blending
  • 75-minute working time allows careful positioning
  • Self-leveling liquid flows into gaps for full coverage
  • Machinable cured epoxy enables post-cure drilling or tapping
  • Zero VOC content meets strict indoor air standards

Specifications

TypeSealing Compound
BrandDEVCON

Questions about this item

Which DEVCON 10710 epoxy version should I choose for a metal repair?

This single product is a two-part gray epoxy in a jar with a 5:1 mix ratio; it bonds metal, cures at ambient temperature, and is machinable after 16 hours.

What does the 75-minute working time mean when I am mixing and applying it?

You have 75 minutes at room temperature to mix the resin and hardener, apply the self-leveling liquid, and position parts before it begins to set.

How does the 5:1 mix ratio affect the cure and final strength?

Measure five parts resin to one part hardener by volume; the low-viscosity blend cures to a gray, water-resistant bond with zero VOCs and low shrinkage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.