Desoldering Solder Sucker SS-02 12cm

Desoldering Solder Sucker SS-02

The Desoldering Solder Sucker SS-02 is a hand-operated tool for removing molten solder from printed circuit boards. It suits electronics hobbyists and professional technicians who need to rework components or correct assembly errors. A flexible silicone nozzle resists heat from direct contact with a soldering iron tip. The metal body provides durability for repeated use.

12 cm length with one-handed operation

At 12 cm long, the sucker fits into tight spaces and hard-to-reach areas on dense boards. Its vacuum action clears solder from through-hole joints and small pads in a single stroke. The tool reaches its limit with large thermal masses such as ground planes or multi-layer power planes where heat dissipates too quickly. Surface-mount pads with minimal solder volume are also difficult to clear completely.

Spring-loaded plunger with silicone nozzle

The spring-loaded plunger resets instantly after each actuation, freeing the other hand to hold the soldering iron. No external power, compressed air or hose is required, so the tool adds no cable clutter to the bench. The silicone nozzle withstands direct contact with hot iron tips without melting. Users needing continuous high-volume desoldering or heated-vacuum stations will find this manual tool insufficient.