We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver stainless steel wire rope coil 1/4 inch diameter 50 feet long 19x7 construction

Dayton

Dayton Wire Rope 1/4 in 50 ft 19x7 1152 lb

SKU CH-ERRS-3FE6D

1/4 in stainless-steel wire rope, 50 ft of 19x7 IWRC construction rated for 1,152 lb working load

  • 1/4 in diameter fits compact rigging
  • 19x7 strand construction resists fatigue
  • 1152 lb working load supports heavy lifts
  • 5760 lbf breaking strength adds safety margin
  • 304 stainless steel resists corrosion

Zoro Select 304 stainless wire rope

This Zoro Select wire rope is a 50-foot length of 304 stainless steel built for lifting and pulling tasks. Its 19 by 7 strand construction around an independent wire rope core gives a working load limit of 1,152 pounds and a breaking strength of 5,760 pounds-force. The plain, unlubricated finish leaves the silver metal exposed for inspection and corrosion resistance. It arrives new and ready for rigging, hoisting or winching applications.

For general lifting where stainless durability

The rope suits maintenance crews, marine environments and industrial settings that need a corrosion-resistant line rated for overhead lifting. Buyers who require a galvanised or coated rope for different abrasion characteristics, or who need a larger diameter for heavier loads, should look at alternative specifications. The unlubricated surface also means users must apply their own dressing if lubrication is required for the application.

19x7 IWRC construction defines the strength

The 19 by 7 strand pattern with an independent wire rope core sets the working load limit at 1,152 pounds and the breaking strength at 5,760 pounds-force. This construction balances fatigue resistance with the stiffness needed for reliable spooling on drums and sheaves. Confirm that the 1/4 inch diameter and 50 foot length match the drum capacity and reach required for the job before purchase.

Highlights

  • 1/4 in diameter fits compact rigging
  • 19x7 strand construction resists fatigue
  • 1152 lb working load supports heavy lifts
  • 5760 lbf breaking strength adds safety margin
  • 304 stainless steel resists corrosion

Specifications

BrandZORO SELECT

Questions about this item

How do I install the 1/4 in diameter 19x7 wire rope and what step is often missed?

Thread the plain ends through sheaves or winch drums matching the 1/4 in groove, then secure with properly sized clips or thimbles; the step often missed is applying the correct number of clips spaced at the recommended distance for 19x7 construction.

What maintenance or replacement will the 304 stainless steel 19x7 rope need over time?

Inspect regularly for broken wires, corrosion, or diameter reduction; replace when broken wires exceed the allowance for 19x7 classification or when wear reduces the 1/4 in diameter below the minimum for the 1,152 lb working load limit.

What limit appears first when the 50 ft rope runs continuously at its 1,152 lb working load?

The 1,152 lb working load limit is reached before the 5,760 lbf breaking strength; sustained operation at or near this limit accelerates fatigue on the 19x7 strands and IWRC core, requiring earlier replacement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.