We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled galvanized steel chain 1/4 inch links 140 feet

Dayton

Dayton Grade 30 Steel Chain 1/4 in 140 ft

SKU CH-N9QS-7ZQ6J

Grade 30 carbon steel coil chain, 140 ft long with 1/4 in trade size and 1,300 lb working load limit, galvanized finish for corrosion resistance

  • Grade 30 carbon steel delivers 1,300 lb working load limit
  • Galvanized finish resists corrosion across -40 to 400 °F range
  • 140 ft coil provides 10 links per foot for flexible rigging
  • Straight link design ensures consistent strength along full length
  • Not rated for overhead lifting — use for pulling and conveying only

Dayton Grade 30 Steel Chain 1/4 in 140 ft

This Dayton coil chain is made from carbon steel with a galvanized finish. It is supplied in a 140 ft length with a trade size of 1/4 in. The chain uses straight links measuring 1 1/4 in inside length and 3/8 in inside width. It is rated for a working load limit of 1,300 lb and is not intended for overhead lifting applications.

Pulling and binding tasks, not lifting

The chain suits general-purpose pulling, towing or securing loads where Grade 30 strength is specified. It operates across a temperature range of -40 to 400 degrees F. Buyers who need overhead lifting capability or a higher working load limit should select a different grade of chain. Hooks and end fittings are not included with this coil.

Working load limit 1,300 lb

The single figure that decides suitability is the 1,300 lb working load limit. Verify that this rating meets the requirement of the intended pulling or binding job before purchase. The chain carries California Proposition 65 warnings for cancer and reproductive harm.

Highlights

  • Grade 30 carbon steel delivers 1,300 lb working load limit
  • Galvanized finish resists corrosion across -40 to 400 °F range
  • 140 ft coil provides 10 links per foot for flexible rigging
  • Straight link design ensures consistent strength along full length
  • Not rated for overhead lifting — use for pulling and conveying only

Specifications

BrandDayton

Questions about this item

What working load limit does the Grade 30 rating cap at for this 1/4 in chain?

The Grade 30 rating gives a working load limit of 1,300 lb for this 1/4 in carbon-steel chain.

What are the inside link dimensions that determine which fittings will fit?

Each straight link has an inside length of 1 1/4 in and an inside width of 3/8 in, so fittings must accommodate those measurements.

How is the 140 ft coil typically deployed, and what step is often missed?

Uncoil the chain on a clean, flat surface to avoid kinks, then inspect every link for damage before putting it under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.