We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 6XJ58 split-phase motor, steel frame, TEFC enclosure, cradle base, keyed shaft

Dayton

Dayton 6XJ58 split-phase motor 1/2 hp 1725 rpm 56 frame

SKU CH-0RTR-6JESN

Split-phase motor delivers 1/2 hp at 1725 rpm in a 56-frame steel housing with dual-speed 115 V operation

  • 1/2 hp output drives demanding HVAC loads
  • Two-speed operation at 1725 and 1140 rpm for flexible airflow
  • Totally enclosed fan-cooled steel frame protects internals in harsh environments
  • 115 V single-phase power suits standard commercial wiring
  • Keyed 56-frame shaft with cradle base simplifies mounting

Motor type and purpose

The Dayton 6XJ58 is a split-phase general-purpose motor rated at 1/2 hp and built in a 56 frame. It runs on 115 V AC single-phase power and is suited for continuous-duty HVAC equipment such as fans, blowers and pumps.

Enclosure and thermal behaviour

A totally enclosed fan-cooled steel frame keeps dust and moisture out while allowing operation up to 40 °C ambient. The motor carries Class B insulation and a 1.0 service factor, so it delivers rated output without overload headroom.

Speed range and electrical limits

Two-speed operation provides 1725 rpm at high speed and 1140 rpm at low speed, drawing 7.2 A and 5.0 A respectively. The keyed shaft and cradle base mount simplify coupling, but the lack of built-in thermal protection means external overload devices are required for safe operation.

Highlights

  • 1/2 hp output drives demanding HVAC loads
  • Two-speed operation at 1725 and 1140 rpm for flexible airflow
  • Totally enclosed fan-cooled steel frame protects internals in harsh environments
  • 115 V single-phase power suits standard commercial wiring
  • Keyed 56-frame shaft with cradle base simplifies mounting

Specifications

BrandDAYTON

Questions about this item

Will the split-phase windings or centrifugal switch need replacement after extended use?

The motor uses a split-phase design with no thermal protection listed, so the centrifugal switch and start winding are the wear items; inspect them during routine HVAC maintenance intervals.

What limits continuous operation at the 1725 rpm high-speed setting?

The 1.0 service factor and Class B insulation rated for 40 °C maximum ambient temperature define the thermal ceiling for sustained full-load running at 7.2 A.

How much heat and noise should I expect when the motor runs all day at 115 V?

Totally enclosed fan-cooled steel frame dissipates heat from the 7.2 A draw without external ventilation; audible level is typical for a 1/2 hp split-phase motor in HVAC duty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.