Dayton
Dayton 61HL71 1800 cfm 1/2 hp 115V blower
Portable centrifugal blower delivers 1800 cfm airflow with two-speed 1/2 hp motor on 115V power
- ColorTransparent
- Delivers 1800 cfm airflow for rapid drying
- Two-speed motor adapts to light or heavy tasks
- 1/2 hp 115V AC motor runs on standard outlets
- 25 ft cord with GFCI 5-15P plug improves safety
- ETL listed and fully assembled for immediate use
Portable 1800 cfm centrifugal blower
The Dayton 61HL71 is a 1/2 hp centrifugal blower rated for 1800 cfm at 115 V AC. It connects via a standard 5-15P plug on a 25 ft cord and includes a built-in GFCI for ground-fault protection. The unit ships fully assembled on a fixed frame with wheels for mobility across job sites or workshops.
Two-speed motor for sustained airflow
A two-speed motor lets operators match output to the drying or ventilation task without cycling the unit on and off. The 4.5 A full-load current at 60 Hz supports continuous operation on typical 15 A branch circuits. ETL listing confirms compliance with applicable North American safety standards for extended duty cycles.
Horizontal and vertical airflow direction
The blower discharges air in both horizontal and vertical planes without a pivoting nozzle, simplifying positioning under structures or along walls. The transparent housing allows visual inspection of the impeller area during maintenance. No daisy-chain outlets are provided, so each unit requires its own receptacle.
Highlights
- Delivers 1800 cfm airflow for rapid drying
- Two-speed motor adapts to light or heavy tasks
- 1/2 hp 115V AC motor runs on standard outlets
- 25 ft cord with GFCI 5-15P plug improves safety
- ETL listed and fully assembled for immediate use
Specifications
| Brand | DAYTON |
|---|---|
| Color | Transparent |
Questions about this item
How loud is the 1/2 hp motor when running continuously at 1800 cfm?
The 1/2 hp motor draws 4.5 A at 115V AC, producing 1800 cfm on two speeds with ETL-listed construction for safe extended operation.
What power outlet do I need for the 25 ft cord with 5-15P plug?
A standard 115V 60 Hz NEMA 5-15R receptacle is required; the built-in GFCI protection works with that outlet type.
Can I plug additional tools into this blower while it runs?
The unit has zero power outlets and no daisy-chain capability, so it cannot supply power to other devices.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



