We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1/10 hp HVAC control motor, transparent housing, cradle base, 10 1/2 in shaft, 59 in leads

Dayton

Dayton 5WJC0 HVAC Control Motor 1/10 hp 115V 4 Speed

SKU CH-228Q-YHBBW

Single-phase PSC motor delivers 1/10 hp at 1,050 RPM with four speeds, 115 V operation and 1.62 A full-load current

  • ColorTransparent
  • 1/10 hp motor powers room air conditioners
  • Four speed settings match cooling demand
  • 115 V single-phase supply fits standard wiring
  • Auto thermal protection prevents overheating damage
  • 59 in leads simplify cradle-base installation

HVAC Motor for Room Air Conditioners

The Dayton 5WJC0 is a single-phase permanent split capacitor motor rated at one-tenth horsepower for 115 volt AC supply. It suits replacement or service work on residential room air conditioners where a four-speed direct-drive unit is specified.

Thermals and Power Draw

Automatic thermal protection and Class B insulation support continuous duty in ambient temperatures up to 60 degrees Celsius. The motor draws 1.62 amps at full load on a 60 hertz supply, running at 1050 RPM nameplate speed across its four selectable speeds.

Cradle Base Mounting and Long Shaft

A horizontal cradle base and a ten-and-a-half inch shaft allow direct coupling to blower wheels in tight cabinets. The 59 inch lead length gives routing flexibility, while the open air-over enclosure and reversible rotation simplify installation without rewiring.

Highlights

  • 1/10 hp motor powers room air conditioners
  • Four speed settings match cooling demand
  • 115 V single-phase supply fits standard wiring
  • Auto thermal protection prevents overheating damage
  • 59 in leads simplify cradle-base installation

Specifications

BrandDAYTON
ColorTransparent

Questions about this item

How do I install the 59 in leads on the cradle-base motor?

Mount the 42Y frame horizontally on the cradle base, route the 59 in leads to the terminal block, and secure the 10 1/2 in shaft to the blower wheel before tightening the set screw.

What maintenance will the open air-over motor need?

The auto thermal protection and Class B insulation are maintenance-free; only periodic cleaning of the open enclosure and checking the 1.62 A full-load amp draw are required.

What limits continuous operation at 60 °C ambient?

The 1.0 service factor and auto thermal protection will trip first if the 1/10 hp motor sustains full load at the 60 °C maximum ambient temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.