Dayton
Dayton 5K602 HVAC Control 1/3hp 1725RPM 48Z
Single-phase split-phase motor delivers 1/3 hp at 1,725 RPM with 230 V AC, 3.5 A full-load current and 1.35 service factor
- 1/3 hp motor powers HVAC systems efficiently
- 1725 RPM delivers steady airflow performance
- 230 V single-phase supply suits standard wiring
- Open drip-proof enclosure resists moisture ingress
- Auto thermal protection prevents overheating damage
General-purpose motor for HVAC duty
This Dayton 5K602 motor delivers 1/3 hp at 1,725 RPM on a 230 V AC single-phase supply. The split-phase design suits continuous operation in HVAC equipment such as fans, blowers and pumps. A 48Z frame with cradle-base mounting and a flat shaft simplifies direct replacement in compatible units.
Continuous duty with thermal protection
Rated for continuous duty, the motor carries a 1.35 service factor and Class B insulation for sustained loading. Automatic thermal protection resets without intervention when the 40 °C ambient limit is exceeded. The open drip-proof enclosure allows airflow while guarding against falling moisture in indoor installations.
Single-speed 230 V AC input
Operation is fixed at 60 Hz and 3.5 A full-load current with no speed-selection or voltage-change capability. The shaft rotates CW or CCW as wired, but the motor provides only one nameplate speed. Buyers who need multi-speed control or a different voltage must choose another model.
Highlights
- 1/3 hp motor powers HVAC systems efficiently
- 1725 RPM delivers steady airflow performance
- 230 V single-phase supply suits standard wiring
- Open drip-proof enclosure resists moisture ingress
- Auto thermal protection prevents overheating damage
Specifications
| Brand | DAYTON |
|---|
Questions about this item
How much heat and noise does the 1/3 hp split-phase motor produce when running continuously at 1725 RPM?
The open drip-proof enclosure and Class B insulation are rated for continuous duty at up to 40 °C ambient, with automatic thermal protection to limit temperature rise.
What electrical supply and mounting does the 48Z frame motor require?
It needs a 230 V AC, 60 Hz single-phase circuit capable of 3.5 A full-load current and a cradle-base mounting surface for the 48Z frame.
Can the 5K602 replace an older 48-frame motor that turns the opposite direction?
Yes, the shaft rotates both CW and CCW so it can match the rotation of the unit being replaced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



