We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton motorized damper, 27 inch square galvanized steel frame, 12 inch depth, 14 gauge thickness

Dayton

Dayton 3C727 Motorized Damper 27 in Square 12 in Long 14 ga

SKU CH-32H8-ZV9CX

A 27-inch square motorised damper with a 12-inch depth and 14-gauge steel frame, power-open spring-return action for 100-240 V systems

  • TypeSingle Panel, Power Open, Spring Return
  • Square motorized damper fits 27 in duct openings
  • 14-gauge galvanized steel frame resists corrosion
  • Power-open spring-return actuator operates on 100-240 V supply
  • Dynamic-rated blades handle up to 3500 fpm airflow
  • 12 in installation depth suits tight mechanical spaces

Dayton 3C727 Square Motorized Damper

This Dayton 3C727 is a single-panel motorized control damper built for square ductwork. The galvanized-steel blade operates on a power-open, spring-return cycle and fits a 27 in square rough opening with a 12 in frame depth. It is rated for 3500 fpm maximum velocity and 4 in wg static pressure.

Suits square duct systems needing automated

Installers who require a round damper, a multi-blade configuration or a different frame gauge should select another model. Systems that exceed the stated velocity or pressure limits are not served by this unit.

27 in square rough opening with 12 in frame depth

The damper is manufactured to fit a 25 in by 25 in rough opening within a 27 in square frame and a 14 ga galvanized steel construction. Verify these exact dimensions against your duct layout before purchase.

Highlights

  • Square motorized damper fits 27 in duct openings
  • 14-gauge galvanized steel frame resists corrosion
  • Power-open spring-return actuator operates on 100-240 V supply
  • Dynamic-rated blades handle up to 3500 fpm airflow
  • 12 in installation depth suits tight mechanical spaces

Specifications

BrandDAYTON
TypeSingle Panel, Power Open, Spring Return

Questions about this item

What power supply does the 100-240V motor need to operate?

The motor runs on 100-240V AC so you must wire it to a mains circuit with a matching voltage and a suitable disconnect.

Will the 25 in square rough opening match my existing 27 in square ductwork?

The damper fits a 25 in by 25 in rough opening; the 27 in overall frame overlaps the duct so the opening must be cut to 25 in square.

How do I confirm the actuator cycles correctly after installation?

Apply power and watch the single panel open fully; remove power and the spring should return it to the closed position.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.