We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow glass-filled nylon Type K thermocouple plug with two flat pins

Dayton

Dayton 36GL02 Type K Thermocouple Plug Yellow

SKU CH-MB4Y-73QAR

A yellow glass-filled nylon Type K thermocouple plug rated to 220 °C with two flat pins

  • ColorYellow
  • Type K sensor compatibility for accurate temperature measurement
  • Glass-filled nylon body withstands 428 °F continuous heat
  • Standard two-pin flat layout ensures quick instrument connection
  • Yellow colour code allows instant circuit identification
  • Nylon sheath protects pins from damage during handling

Dayton 36GL02 Type K Thermocouple Plug

The Dayton 36GL02 is a standard two-pin thermocouple plug designed for Type K sensors. Its glass-filled nylon housing and nylon sheath withstand temperatures up to 220 degrees C or 428 degrees F. The yellow colour coding identifies the connector type at a glance. Technicians and engineers use it to build or repair temperature probes in industrial and HVAC environments.

Replacing worn or damaged Type K connectors

Swap this plug when an existing Type K connector shows melted plastic, loose pins or intermittent readings. The glass-filled nylon body resists heat better than standard nylon, so the upgrade is worth it when the application runs near the 220 degrees C limit. It is not for buyers who need a different thermocouple calibration or a miniature connector format.

Verify sensor type and pin layout before ordering

Confirm the probe uses Type K thermocouple wire and accepts a standard flat-pin plug. Check that the two-pin configuration matches the instrument jack. Ensure the operating temperature stays within the 220 degrees C maximum. This plug is not for users who require a three-pin connector, a different colour code or a higher temperature rating.

Highlights

  • Type K sensor compatibility for accurate temperature measurement
  • Glass-filled nylon body withstands 428 °F continuous heat
  • Standard two-pin flat layout ensures quick instrument connection
  • Yellow colour code allows instant circuit identification
  • Nylon sheath protects pins from damage during handling

Specifications

BrandDAYTON
ColorYellow

Questions about this item

What wire gauge does the 2-pin flat-pin connector accept?

The standard Type K plug uses two flat pins in a glass-filled nylon body; strip each conductor to the length recommended for flat-pin terminals and tighten the set screws securely.

Which step do installers most often miss when wiring this yellow Type K plug?

Many forget to match the yellow body colour to the Type K colour code and to verify polarity before tightening the flat-pin set screws.

When should the glass-filled nylon plug be replaced?

Replace the plug if the nylon sheath shows heat damage above 220 °C or 428 °F, if the flat pins become loose, or if the housing cracks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.