We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 36GK98 Type K thermocouple probe 12in 19 AWG Inconel 600 sheath standard plug

Dayton

Dayton 36GK98 Type K Thermocouple Probe 12in 19 AWG

SKU CH-XYZG-7P53F

Type K thermocouple probe with 12 in Inconel 600 sheath, 19 AWG element and standard plug, rated to 2,150 °F and 1,000 psi

  • TypeTemperature Controllers
  • Type K thermocouple with Inconel 600 sheath withstands 2150 °F
  • Ungrounded 12.0 in probe reduces electrical noise
  • ±1.1 °C accuracy below 293 °C ensures precise readings
  • ±0.4 % accuracy above 293 °C maintains reliability
  • 19 AWG element rated to 1000 psi for rugged use

Thermocouple probe type K 12 in

The Dayton 36GK98 is an ungrounded type K thermocouple probe with a 12.0 in sheath made from Inconel 600. It uses a standard plug connector and 19 AWG metal-insulated cable with magnesium oxide insulation. The probe meets ANSI standards and is rated to 1,000 psi maximum pressure.

Replaces worn or mismatched type K sensors

Upgrade when an existing probe shows drift beyond the stated error limits of +/- 1.1 °C below 293 °C or +/- 0.4 % above that temperature. The 2,150 °F upper limit and Inconel 600 sheath suit harsh environments where lesser sheaths corrode or fail. A direct swap is justified when the application demands the specified accuracy and pressure rating.

Suits process and lab temperature measurement

Engineers and technicians needing a rugged type K probe for high-temperature gas, liquid or surface readings will find the specifications match. Buyers who need a different sheath diameter, a grounded junction, a miniature connector or a higher pressure rating should look at other probe configurations.

Highlights

  • Type K thermocouple with Inconel 600 sheath withstands 2150 °F
  • Ungrounded 12.0 in probe reduces electrical noise
  • ±1.1 °C accuracy below 293 °C ensures precise readings
  • ±0.4 % accuracy above 293 °C maintains reliability
  • 19 AWG element rated to 1000 psi for rugged use

Specifications

BrandDAYTON
TypeTemperature Controllers

Questions about this item

What sheath diameter must the mounting hole accept for this probe?

The probe sheath is 0.188 in diameter so the mounting hole or compression fitting must accommodate that size.

How is the probe connected to the instrument and what is the common wiring mistake?

It uses a standard Type K plug; the common mistake is reversing the chromel and alumel leads which inverts the temperature reading.

When should the probe be replaced based on its insulation and accuracy limits?

Replace it if the magnesium oxide insulation becomes contaminated or if readings drift beyond the stated ±1.1 °C below 293 °C or ±0.4 % above that temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.