We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal DIN-rail power supply, grey case, LED indicator, terminal blocks visible

Dayton

Dayton 33NT13 DC Power Supply 24V 240W 10A DIN Rail

SKU CH-DNZN-6TXAK

DIN-rail switching supply delivering 24 V DC at 10 A from a 90 to 264 V AC input

  • Delivers stable 24 V DC at 10 A continuous output
  • Accepts wide 90 to 264 V AC input for global use
  • DIN-rail mount with compact 2.36 in width saves panel space
  • Metal case rated IP20 and NEMA 1 protects internal components
  • LED status indicator plus O/P monitor signal simplifies troubleshooting

Industrial DIN-rail power supply

The Dayton 33NT13 is a 24 V DC switching supply rated at 240 W and 10 A continuous output. It accepts a universal 90 to 264 V AC input at 47 to 63 Hz, making it suitable for control panels, automation cabinets and machinery that require a stable 24 V rail.

Snap-on DIN-rail mounting

The unit clips onto standard DIN rail without tools, and the metal case measures 4.88 in high, 2.36 in wide and 4.45 in deep. IP20 rating means the terminals are finger-safe but not sealed against dust or water, so the enclosure must provide the required environmental protection.

240 W with 15 A peak headroom

Continuous load up to 10 A is supported, while a 15 A peak capability handles brief inrush from contactors or solenoids. Output noise stays at or below 1 % and hold-up time exceeds 20 ms, giving a clean rail for PLCs and sensors; sustained loads above 10 A will trip the internal protection.

Highlights

  • Delivers stable 24 V DC at 10 A continuous output
  • Accepts wide 90 to 264 V AC input for global use
  • DIN-rail mount with compact 2.36 in width saves panel space
  • Metal case rated IP20 and NEMA 1 protects internal components
  • LED status indicator plus O/P monitor signal simplifies troubleshooting

Specifications

BrandDAYTON

Questions about this item

How can I verify the unit is operating correctly once it is wired and powered?

The front-panel LED marked OK lights when the output is within specification, and the O/P Monitor signal provides a remote status contact for external monitoring.

What accessories are included with the 33NT13 and what must be sourced separately?

The supply itself is the only item listed; DIN-rail mounting hardware, input/output wiring, and any required fusing or disconnect devices are not included.

Which version of this supply should I select for a 240 W, 24 V DC load?

The 33NT13 is a single 24 V, 240 W, 10 A model with a 90–264 V AC input range, so no alternative voltage or capacity versions exist for this part number.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.