We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver galvanised steel festoon lead car for flat cable, compact rectangular form

Dayton

Dayton 33N227 Festoon Lead Car Flat Cable 48 lb

SKU CH-C7DA-4YPGX

A galvanised-steel festoon lead trolley for flat cable on C-track, rated to 48 lb and accepting cable up to 2.13 in wide by 1.38 in high

  • Supports up to 48 lb load capacity
  • Fits flat cable up to 1.38 in high by 2.13 in wide
  • Galvanised steel construction resists corrosion
  • C-track compatible for smooth trolley operation
  • California Proposition 65 chemical warning applies

Dayton 33N227 Festoon Lead Car

The Dayton 33N227 is a festoon lead trolley designed for flat cable management on C-track systems. It suits industrial and automotive maintenance teams who need reliable cable guidance for moving equipment. The galvanised steel body resists corrosion in demanding environments. This component is not for users who require round cable compatibility or higher load ratings.

Thermals noise and power draw

This mechanical trolley has no motor, electronics or moving parts that generate heat or noise. It adds negligible resistance to the cable system during normal operation. No external power supply or cooling is required. The unit simply rolls along the track as the connected equipment moves.

Build fit and clearance

The trolley accepts flat cables up to 2.13 in wide and 1.38 in high. Overall width is 3.23 in, so verify track spacing before installation. It mounts directly onto compatible C-track without additional brackets. The 48 lb maximum load capacity limits the total weight of cable and fittings it can support.

Highlights

  • Supports up to 48 lb load capacity
  • Fits flat cable up to 1.38 in high by 2.13 in wide
  • Galvanised steel construction resists corrosion
  • C-track compatible for smooth trolley operation
  • California Proposition 65 chemical warning applies

Specifications

BrandDAYTON

Questions about this item

How do I mount the 33N227 festoon lead car onto C-track and what step is commonly missed?

Slide the trolley wheels onto the C-track flange, then secure the flat cable in the saddle so its height stays within 1.38 in and width within 2.13 in; the step often missed is tightening the saddle bolts after the first load cycle.

What part of the 33N227 will need inspection or replacement over time?

The galvanised-steel wheels and axle bearings should be checked for wear or corrosion; the flat-cable saddle may also require replacement if the cable edges show fraying from the 48 lb load.

At what load does the 33N227 reach its limit during continuous operation?

The rated maximum load capacity is 48 lb; sustained use at or above this figure will cause premature wheel wear and cable deformation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.