We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray thermoplastic wall-mounted control station with a red 22 mm momentary push button labeled Stop

Dayton

Dayton 32W266 22 mm Push Button Stop Control Station 1NC

SKU CH-KY0Q-36482

A 22 mm red momentary push-button stop station with a single normally-closed contact rated 10A at 600V AC, housed in a grey thermoplastic NEMA 4/4X enclosure for wall mounting

  • Engine BrandDAYTON
  • Engine Size22 mm
  • 22 mm push button fits standard panel cutouts
  • Red momentary stop button with 1NC contact for emergency circuits
  • Thermoplastic enclosure rated NEMA 4/4X resists dust and water jets
  • UL, CSA, CE and IEC listed for code-compliant installations
  • Rated 10 A at 600 V AC and 2.5 A at 24 V DC

Industrial Stop Control Station

The Dayton 32W266 is a 22 mm push button stop control station with a single normally closed contact. It is intended for industrial machinery panels where an operator needs a momentary red stop button mounted on a wall enclosure.

Thermals Noise and Power Draw

The contact rating is 10A at 600V AC and 2.5A at 24V DC with an A600/Q600 NEMA designation. The thermoplastic enclosure carries NEMA 4 and 4X ratings for protection against water and dust ingress during normal operation.

Bundled Accessories and Software

The unit ships as a complete wall mount assembly with a gray thermoplastic enclosure measuring 1.98 in high, 2.92 in wide and 2.69 in deep. It meets CE, CSA, IEC and UL listed standards and includes a Proposition 65 warning for California buyers.

Highlights

  • 22 mm push button fits standard panel cutouts
  • Red momentary stop button with 1NC contact for emergency circuits
  • Thermoplastic enclosure rated NEMA 4/4X resists dust and water jets
  • UL, CSA, CE and IEC listed for code-compliant installations
  • Rated 10 A at 600 V AC and 2.5 A at 24 V DC

Specifications

Engine BrandDAYTON
Engine Size22 mm

Questions about this item

How do I mount the 22 mm push button stop control station on a wall and what step is often missed?

Drill a 22 mm cutout, insert the operator, and secure the thermoplastic enclosure with wall-mount screws; the step often missed is tightening the locking nut behind the panel to meet NEMA 4/4X sealing.

What maintenance or replacement will the 1NC contact block need over time?

The 1NC contact block rated at 10A @ 600V AC and 2.5A @ 24V DC should be inspected for contact wear and replaced if switching becomes unreliable after repeated momentary operations.

What limit appears first when the stop button is held continuously under load?

The contact rating of 10A @ 600V AC or 2.5A @ 24V DC is the limiting factor; sustained current above these values will cause overheating and contact degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.