We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 22 mm flush metal push button, black with chrome bezel

Dayton

Dayton 30G242 22 mm Push Button Operator 1NO Black

SKU CH-AW4R-KNHZE

22 mm flush push-button operator with momentary action, 1NO contact rated 10 A at 600 V AC, metal head, chrome die-cast aluminium bezel, black button, NEMA 1, 2, 3, 4, 4X, 12, 13 ratings, CE, CSA.

  • TypeIndustrial Electrical Controls & Automation
  • Size22 mm
  • 22 mm cut-out fits standard panels
  • 10 A at 600 V AC handles heavy loads
  • NEMA 4X rating resists wash-down environments
  • Pressure-plate terminals speed up wiring
  • CE, CSA, IEC and UL listed for compliance

22 mm Flush Push Button Operator

This Dayton 30G242 is a momentary industrial push button with a 22 mm metal head and black finish. It carries a single normally-open contact rated at 10A @ 600V AC under the A600/Q600 designation. The unit meets NEMA 1, 2, 3, 4, 4X, 12 and 13 ratings for dust and water ingress. It is suited for control panels that require a single flush-mounted operator.

Panel Cut-Out and Wiring Requirements

The operator fits a standard 22 mm panel cut-out and uses pressure-plate terminals for secure wire connection. A chrome die-cast aluminium bezel provides a durable mounting surface. No legend plate is included, so labelling must be sourced separately. The device is CE, CSA, IEC and UL listed for compliance with common industrial standards.

Sustained Load and Environmental Behaviour

The metal head and NEMA 4X rating allow the button to withstand repeated actuation in wet or dusty environments without degradation. Contact performance remains stable under continuous 10A AC loads within the rated voltage. The momentary action returns reliably after each press, making it suitable for frequent start or reset cycles in automation equipment.

Highlights

  • 22 mm cut-out fits standard panels
  • 10 A at 600 V AC handles heavy loads
  • NEMA 4X rating resists wash-down environments
  • Pressure-plate terminals speed up wiring
  • CE, CSA, IEC and UL listed for compliance

Specifications

BrandDAYTON
TypeIndustrial Electrical Controls & Automation
Size22 mm

Questions about this item

How much current can the 10 A / 600 V AC contact handle before it becomes the limiting factor?

The contact is rated for 10 A at 600 V AC with NEMA designation A600/Q600, so sustained loads above 10 A will exceed its rating.

Does the metal head and chrome die-cast aluminium bezel get hot or noisy during continuous operation?

The operator is a passive mechanical switch; it generates no noise or measurable heat of its own during all-day use.

What mounting cut-out and panel thickness does the 22 mm flush booted button require?

It fits a standard 22 mm panel cut-out; the pressure-plate terminals accept wire directly with no extra hardware needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.