We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 304 stainless steel wire rope on a spool, 1/8 inch diameter, 250 foot length

Dayton

Dayton 304 Stainless Wire Rope 1/8 in 250 ft 352 lb

SKU CH-34JF-WV0XP

304 stainless steel wire rope, 250 ft length, 1/8 in diameter, 352 lb working load limit and 1,760 lbf breaking strength

  • 304 stainless steel resists corrosion
  • 250 ft continuous length reduces splice points
  • 7 x 19 strand construction stays flexible under load
  • 352 lb working load limit supports lifting tasks
  • 1,760 lbf breaking strength provides safety margin

Dayton 304 Stainless Wire Rope 250 ft

This Dayton wire rope is a 250 ft length of 304 stainless steel designed for lifting and pulling tasks. It features a 7 x 19 strand construction with an IWRC core and a 1/8 in diameter. The rope is unlubricated and uncoated with a plain end finish.

Suits static lifts within 352 lb limit

Buyers needing a working load limit of 352 lb and a breaking strength of 1,760 lbf for stationary hoisting will find this suitable. It is not for dynamic rigging, running sheaves or applications requiring a bend radius specification. Users needing galvanised or lubricated rope should look elsewhere.

Working load limit 352 lb decides fit

The single specification that determines suitability is the 352 lb working load limit. Verify that your maximum applied load stays at or below this figure. The 1,760 lbf breaking strength provides the safety margin but does not raise the working limit.

Highlights

  • 304 stainless steel resists corrosion
  • 250 ft continuous length reduces splice points
  • 7 x 19 strand construction stays flexible under load
  • 352 lb working load limit supports lifting tasks
  • 1,760 lbf breaking strength provides safety margin

Specifications

BrandZORO SELECT

Questions about this item

What is the working load limit of the 304 stainless wire rope?

The working load limit is 352 lb for the 1/8 in diameter rope.

Does the 304 stainless wire rope generate heat during continuous pulling?

The unlubricated 7 x 19 construction runs without a temperature rating; friction at the bend radius is the practical limit.

What fittings are needed to use the plain ends of the 250 ft wire rope?

The ends are plain, so you must supply thimbles, clips or swaged sleeves that match 1/8 in diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.