We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Coiled silver 304 stainless steel cable 150 ft 3/8 in diameter 7x19 strand construction

Dayton

Dayton 3/8 in 150 ft 2400 lb Stainless Steel Cable

SKU CH-ZNEC-GGDN4

304 stainless-steel cable, 150 ft long with a 2,400 lb working load limit and 12,000 lbf breaking strength

  • 304 stainless resists corrosion in harsh environments
  • 7x19 construction provides flexibility for routing
  • 2400 lb working load limit handles heavy lifts
  • 12000 lbf breaking strength adds safety margin
  • 150 ft length covers extended runs

3/8 in 150 ft Stainless Steel Cable

This 3/8 inch diameter cable is made from 304 stainless steel with a 7 x 19 strand construction and an independent wire rope core. It is supplied in a 150 foot length with plain ends and an unlubricated, uncoated silver finish. The cable is rated for lifting applications and carries California Proposition 65 warnings for cancer and reproductive harm.

2400 lb Working Load Limit

The working load limit is 2400 lb, providing a 5:1 design factor against the 12000 lbf breaking strength. This capacity suits general lifting, pulling and conveying tasks where corrosion resistance is required. The IWRC core adds crush resistance but the cable has no defined bend radius and is not lubricated, so frequent cycling over sheaves will reduce service life.

Replaces galvanised or coated ropes in corrosive

Choose this cable when a plain 304 stainless steel rope is specified and the 2400 lb working load limit meets the design requirement. It is not for applications needing a larger diameter, a higher working load, a lubricated line or a pre-formed end fitting. Buyers who need a different length, a higher grade of stainless steel or a swaged termination must source those separately.

Highlights

  • 304 stainless resists corrosion in harsh environments
  • 7x19 construction provides flexibility for routing
  • 2400 lb working load limit handles heavy lifts
  • 12000 lbf breaking strength adds safety margin
  • 150 ft length covers extended runs

Specifications

BrandZORO SELECT

Questions about this item

Will the 3/8 in diameter and 2400 lb working load limit match the sheaves and winch drum on my existing equipment?

The cable is 3/8 in overall diameter with a 2400 lb working load limit and 12,000 lbf breaking strength, so it fits standard 3/8 in grooves and stays within that load rating.

How can I verify the 7 x 19 strand construction and 304 stainless material once the reel arrives?

Check for the silver, uncoated 304 stainless surface and count seven strands of nineteen wires each in a cross-section; the plain ends show the IWRC core without lubrication.

Does the 150 ft reel include thimbles, sleeves or end fittings, or must I supply them?

The reel comes with plain, unlubricated ends only; thimbles, sleeves or other terminations are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.