We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel wire rope clip and thimble kit for 7/16 inch rope

Dayton

Dayton 2VKK3 Wire Rope Clip and Thimble Kit 7/16 in conveying

SKU CH-EHFX-RE8M4

Kit provides two steel U-bolt clips and one galvanised thimble for securing 7/16 in wire rope

  • Secure loop termination with galvanised steel thimble and two U-bolt clips
  • 7/16 in compatible rope diameter for standard galvanised steel wire rope
  • 7 in rope turnback length ensures proper clip spacing and grip
  • Kit supplies three fittings — one thimble and two clips — in one package
  • Corrosion-resistant galvanised finish on both clips and thimble for outdoor use

Kit Contents and Use

The Dayton 2VKK3 kit provides two U-bolt clips and one thimble for 7/16 in galvanised steel rope. It creates a secure loop termination for lifting, pulling or conveying tasks where a fixed eye is required.

Rope and Hardware Check

Verify that the rope diameter matches 7/16 in and that the material is galvanised steel. Confirm the turnback length allows at least 7 in and that the thimble loop inside dimensions of 2 1/2 in by 1 5/8 in suit your attachment point.

Corrosion Protection and Load Handling

All steel fittings carry a galvanised finish to resist rust in outdoor or industrial environments. The three-piece assembly distributes load across the clips and thimble, reducing wear on the rope during normal tension cycles.

Highlights

  • Secure loop termination with galvanised steel thimble and two U-bolt clips
  • 7/16 in compatible rope diameter for standard galvanised steel wire rope
  • 7 in rope turnback length ensures proper clip spacing and grip
  • Kit supplies three fittings — one thimble and two clips — in one package
  • Corrosion-resistant galvanised finish on both clips and thimble for outdoor use

Specifications

BrandDAYTON

Questions about this item

What comes in the Dayton 2VKK3 kit for 7/16 in rope?

The kit contains two U-bolt clips and one thimble, all made of galvanized steel, for a total of three fittings.

Should I choose a different size for thicker rope?

This kit is built for 7/16 in diameter galvanized steel rope; select a matching kit if your rope is a different size.

How much rope do I need to turn back when installing these clips?

Allow a 7 in turnback length when forming the eye with the included thimble and clips.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.