We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton three-phase motor, open drip-proof steel frame, rigid base mount

Dayton

Dayton 2N982 3-Phase Motor 2 HP 182/4 Frame 230/460V AC

SKU CH-C8XJ-DJEV9

Three-phase general-purpose motor delivering 2 HP at 1750 RPM with 86.5 percent efficiency and dual-voltage 230/460 V AC operation

  • 2 HP output drives demanding industrial loads
  • 5 % nominal efficiency reduces energy costs
  • Dual 230/460 V AC voltage fits varied supplies
  • 15 service factor handles temporary overloads
  • Steel frame with ball bearings ensures durability

Motor type and power

The Dayton 2N982 is a three-phase general-purpose motor rated at 2 HP with a nameplate speed of 1750 RPM. It operates on 230/460V AC at 60 Hz and uses a 182/4 frame with rigid base mounting. The open drip-proof enclosure and steel frame suit indoor industrial installations.

Suitable applications and limits

This motor fits equipment that requires continuous duty at 86.5 percent nominal efficiency and a 1.15 service factor. Buyers who need integrated thermal protection or a different enclosure rating should look at other models. The lack of built-in overload protection means external safeguards must be provided by the installer.

Deciding specification

The dual-voltage design draws 6.2 amps at 230 V or 3.1 amps at 460 V, so the available supply voltage and circuit capacity determine whether this unit can be used. Verify the site voltage and starter sizing before purchase.

Highlights

  • 2 HP output drives demanding industrial loads
  • 5 % nominal efficiency reduces energy costs
  • Dual 230/460 V AC voltage fits varied supplies
  • 15 service factor handles temporary overloads
  • Steel frame with ball bearings ensures durability

Specifications

BrandDAYTON

Questions about this item

Will this 2 HP motor fit the same 182/4 frame mounting as the unit I am replacing?

Yes — the rigid-base design uses the standard 182/4 frame dimensions so it bolts directly to existing mounting holes.

How can I confirm the motor is running correctly after installation?

Measure full-load current at the nameplate values of 6.2 A on 230 V or 3.1 A on 460 V and verify the shaft turns at 1750 RPM in either direction.

What ships with the motor and what must I supply separately?

The motor arrives with a steel frame, ball bearings and Class F insulation ready for continuous duty; you must provide three-phase 230/460 V power wiring, overload protection and any required coupling or pulley.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.