We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 22mm red raised indicator light with polycarbonate lens

Dayton

Dayton 22NZ11 22mm 240V Red raised indicator light

SKU CH-7CWW-TK69E

A 22mm red LED panel indicator for 240V AC circuits with screw terminals, IP40 rating and 15,000-hour life

  • Engine BrandDAYTON
  • Engine Size22mm Mounting dia
  • 22 mm mounting fits standard industrial panels
  • 240 V AC rating suits mains voltage circuits
  • LED draws only 16 mA for low power use
  • 15 000 hour average life reduces replacement frequency
  • UL Listed and IP40 rated for safety and dust protection

22 mm 240 V Red Indicator Light

The Dayton 22NZ11 is a raised panel indicator designed for 22 mm panel cut-outs and 240 V AC supplies. Its red LED gives clear status indication in industrial control panels and machinery. The nylon body with polycarbonate lens meets UL listing and IP40 protection. Suited for electricians and panel builders needing a compact pilot light.

Simple screw-terminal installation

Electrical connection uses M 3.5 screw terminals that accept standard ferrules or stripped wire. The light mounts in panels up to .039 in thick and secures with the included hardware. No special tools are required beyond a screwdriver. Take care to verify the 240 V AC rating matches the circuit before energising.

16 mA draw with 15 000-hour life

The LED draws only 16 mA at 240 V AC, placing minimal load on control circuits. Rated average life reaches 15 000 hours of continuous operation. IP40 rating protects against solid objects larger than 1 mm but not against water ingress. Not suitable for wet or outdoor environments without additional enclosure.

Highlights

  • 22 mm mounting fits standard industrial panels
  • 240 V AC rating suits mains voltage circuits
  • LED draws only 16 mA for low power use
  • 15 000 hour average life reduces replacement frequency
  • UL Listed and IP40 rated for safety and dust protection

Specifications

Engine BrandDAYTON
Engine Size22mm Mounting dia

Questions about this item

How do I verify the 22mm raised indicator light is operating correctly after wiring it to 240V AC?

Apply rated voltage and confirm the red LED illuminates steadily at 16 mA current draw; the UL Listed device is rated for 15,000 hours average life.

What comes in the box and what must I supply separately for the 22NZ11 panel light?

The indicator light with nylon body, polycarbonate lens and M3.5 screw terminals is included; you must provide 240V AC supply wiring and a 22mm panel cut-out no thicker than 0.039 in.

Which voltage version of the Dayton raised indicator light should I choose for a 240V AC control panel?

Select the 240V AC model listed here; it draws 16 mA, fits a 22mm mounting diameter and carries a UL Listing for industrial use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.