We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round blue raised indicator light with polycarbonate lens and nylon body, 22 mm mount

Dayton

Dayton 22NZ02 22 mm 24 V Blue raised indicator light

SKU CH-K890-5RHCA

22 mm raised LED indicator with blue lens, 24 V AC/DC operation, screw terminals and 25 000-hour rated life

  • 22 mm panel cutout fits standard control panels
  • 24 V AC/DC supply works with common control voltages
  • 7 mA draw keeps circuit loading low
  • 25 000 hour rated life reduces replacement frequency
  • UL listed and IP40 rated for indoor use

22 mm 24 V Blue Indicator Light

The Dayton 22NZ02 is a raised panel light with a 22 mm mounting diameter and a blue LED. It operates on 24 V AC or DC and draws 12.7 mA of current. The nylon body and polycarbonate lens suit industrial control panels. It is UL Listed and new.

IP40 Rating and Connection Limits

The light carries an IP40 rating, meaning it is protected against solid objects larger than 1 mm but not against water ingress. Electrical connection uses M 3.5 screw terminals. The unit fits panels up to 0.039 in thick. Average life is rated at 25 000 hours under normal conditions.

Replaces Incandescent Pilot Lights

This LED indicator replaces legacy incandescent pilot lights in the same 22 mm cut-out. The jump is worth it when lower power draw, longer service life and cooler operation are required. It is not suited for applications needing a waterproof seal or a different voltage supply.

Highlights

  • 22 mm panel cutout fits standard control panels
  • 24 V AC/DC supply works with common control voltages
  • 7 mA draw keeps circuit loading low
  • 25 000 hour rated life reduces replacement frequency
  • UL listed and IP40 rated for indoor use

Specifications

BrandDAYTON

Questions about this item

Which 22 mm indicator light version should I pick for a 24 V control panel?

This unit is a 22 mm raised LED indicator rated for 24 V AC/DC with a blue lens, so it matches panels cut for 22 mm mounting holes and 24 V supplies.

What does the 12.7 mA current draw mean once the light is wired into my machine?

At 12.7 mA the LED adds very little load to a 24 V circuit, letting you run many indicators on a single supply without exceeding its rating.

How does the M 3.5 screw connection limit what wire I can use?

The M 3.5 screw terminals accept solid or stranded wire that fits the terminal size, giving a secure connection for typical panel wiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.