We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 12mm raised LED indicator light with nylon body and polycarbonate lens

Dayton

Dayton 22NY86 12mm 12V Green Raised Indicator Light

SKU CH-A64Y-ZDS7C

A 12mm green LED panel indicator for 12V AC/DC circuits with screw terminals and 50,000-hour rated life

  • Engine BrandDAYTON
  • Engine Size12mm Mounting dia
  • 12 mm mounting fits standard panel cut-outs
  • Green LED gives clear status indication at a glance
  • 12 V AC/DC supply works with common control circuits
  • 50 000 hour average life reduces replacement frequency
  • UL listed and IP40 rated for industrial environments

12mm 12V Green Panel Indicator

The Dayton 22NY86 is a raised LED indicator light designed for 12mm panel cut-outs. It operates on 12V AC or DC and draws 17 mA. A nylon body with a polycarbonate lens and brass mounting nut provides IP40 protection. The unit is UL Listed and carries a Proposition 65 warning for California buyers.

Suited for control-panel builds needing a compact

Installers who require a larger mounting diameter or higher ingress protection such as IP65 should look elsewhere. The screw terminals accept M2.5 connections only, so panels wired with different terminal sizes will need adapters. Buyers needing multiple colours in a single housing must choose a different part.

12mm mounting diameter decides fit

The light fits panels between 0.028 in and 0.110 in thick and mounts in a 12mm hole. If the enclosure uses a different cut-out size the indicator cannot be installed without modifying the panel. Average LED life is rated at 50,000 hours.

Highlights

  • 12 mm mounting fits standard panel cut-outs
  • Green LED gives clear status indication at a glance
  • 12 V AC/DC supply works with common control circuits
  • 50 000 hour average life reduces replacement frequency
  • UL listed and IP40 rated for industrial environments

Specifications

Engine BrandDAYTON
Engine Size12mm Mounting dia

Questions about this item

How do I install the 12 mm raised indicator light and what step is often missed?

Drill a 12 mm mounting hole, insert the light through the panel, and tighten the brass nut; the step often missed is checking that panel thickness is between 0.028 in and 0.110 in so the nut can clamp securely.

What maintenance or replacement will the 12 V green LED indicator need later?

The LED is rated for an average life of 50,000 hours; after that the light output will dim and the whole unit should be replaced since the LED is not user-serviceable.

What limit appears first when the indicator runs continuously at 12 V?

The 17 mA current draw is constant, so the first practical limit is the 50,000-hour LED lifetime; the IP40 rating also means dust can accumulate inside over very long runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.